Pages: [1]
Author Topic: ME17.5  (Read 4521 times)
JWebber
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« on: November 12, 2018, 03:54:18 PM »

I have done a little searching on here and have not found a lot of info on this version of ECU . Most of the threads I found were quite old ( 2013 or so ) . Is there not much support for this platform , or are there just not that many people messing with them ? The ECU and harness I have came out of a 2010 Jetta . 07K 906 055 M BENZIN ME17.5 , engine code CBUA .
« Last Edit: November 15, 2018, 03:42:58 PM by JWebber » Logged
aef
Hero Member
*****

Karma: +78/-65
Offline Offline

Posts: 1684


« Reply #1 on: November 12, 2018, 11:50:12 PM »

There is not a single question involved here.

This is a diy board and there is no freeware or cheap tool to read and write this ecu.
Logged
Blazius
Hero Member
*****

Karma: +95/-54
Offline Offline

Posts: 1295



« Reply #2 on: November 13, 2018, 03:00:50 AM »

AFAIK, this tool is mostly for ME7 ecu's and some other ones but not any newers , so I do not think you will get help about that ECU here Tongue
Logged
_nameless
Hero Member
*****

Karma: +374/-3456
Offline Offline

Posts: 3027



« Reply #3 on: November 13, 2018, 05:06:09 AM »

I've done them. Immo off, engine swaps, hardware deletes  feel free to pm me
Logged

UGT Performance | ME7.5 calibration editor, flasher & logger
Audi A4 B6 1.8T (early + late) · AWV / AWP / AWW
· VR6 in beta and 07K in progress
BMW N54, N55, F & G Series, ZF8 calibration editors
https://UGTuner.xyz/
https://github.com/ugtuner05-sys
JWebber
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« Reply #4 on: November 16, 2018, 08:03:42 PM »

I've done them. Immo off, engine swaps, hardware deletes  feel free to pm me
I have tried to send you PMs . Everytime I hit send ,,,, the message vanishes .
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 15 queries. (Pretty URLs adds 0s, 0q)