Pages: [1]
Author Topic: Please help to find XDF file for GM P-12 OS : 12606400  (Read 1516 times)
mishaka509
Newbie
*

Karma: +2/-0
Offline Offline

Posts: 5


« on: September 07, 2023, 05:49:37 PM »

Please help to find XDF file for GM P-12 OS : 12606400 2006 Trailblazer 4.2L 1 mb flash . I am including bin file from PCM .
thank you in advance .



[01:51:22:138] PCM Hammer 021
[01:51:22:153] Wednesday, August 30 2023 @01:51:22:15
[01:51:22:153] Initializing J2534 Device
[01:51:22:169] Loaded DLL
[01:51:22:481] Connected to the device.
[01:51:22:497] Battery Voltage is: 12.9
[01:51:22:513] Thanks for using PCM Hammer.
[01:51:27:475] VIN: 1GNET16S166137666
[01:51:27:553] OS ID: 12606400
[01:51:27:569] Hardware Type: P12
[01:51:27:616] Calibration ID: 12606399
[01:51:27:757] Serial Number: 5295KH07X
[01:51:27:819] Broad Cast Code: YNBD
[01:51:27:866] MEC: 0
Logged
_nameless
Hero Member
*****

Karma: +348/-850
Offline Offline

Posts: 2866



« Reply #1 on: September 07, 2023, 07:05:58 PM »

Please help to find XDF file for GM P-12 OS : 12606400 2006 Trailblazer 4.2L 1 mb flash . I am including bin file from PCM .
thank you in advance .



[01:51:22:138] PCM Hammer 021
[01:51:22:153] Wednesday, August 30 2023 @01:51:22:15
[01:51:22:153] Initializing J2534 Device
[01:51:22:169] Loaded DLL
[01:51:22:481] Connected to the device.
[01:51:22:497] Battery Voltage is: 12.9
[01:51:22:513] Thanks for using PCM Hammer.
[01:51:27:475] VIN: 1GNET16S166137666
[01:51:27:553] OS ID: 12606400
[01:51:27:569] Hardware Type: P12
[01:51:27:616] Calibration ID: 12606399
[01:51:27:757] Serial Number: 5295KH07X
[01:51:27:819] Broad Cast Code: YNBD
[01:51:27:866] MEC: 0
I hate to be the guy to tell you but virtually ZERO public info exists on that ecu, and this forum is not the place to gather info on that ecu. I started to define a 2006 ion redline operating system 12598284 and posted my finding here  https://pcmhacking.net/forums/viewtopic.php?f=42&t=7742&start=540  checkout the last few pages and you will see that I posted my findings. If needed I can do just about anything on that ecu, you can send me a pm and I can take care of your needs. However, I will warn you now this will not be a free service, I'm all about sharing however i just don't have the free time at the moment for free development.
Logged

If you are broke or expecting free handouts DO NOT message me. I'll probably put you on blast if you do.
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.043 seconds with 16 queries. (Pretty URLs adds 0s, 0q)