Pages: [1]
Author Topic: Please help to find XDF file for GM P-12 OS : 12606400  (Read 1157 times)
mishaka509
Newbie
*

Karma: +2/-0
Offline Offline

Posts: 4


« on: September 07, 2023, 05:49:37 PM »

Please help to find XDF file for GM P-12 OS : 12606400 2006 Trailblazer 4.2L 1 mb flash . I am including bin file from PCM .
thank you in advance .



[01:51:22:138] PCM Hammer 021
[01:51:22:153] Wednesday, August 30 2023 @01:51:22:15
[01:51:22:153] Initializing J2534 Device
[01:51:22:169] Loaded DLL
[01:51:22:481] Connected to the device.
[01:51:22:497] Battery Voltage is: 12.9
[01:51:22:513] Thanks for using PCM Hammer.
[01:51:27:475] VIN: 1GNET16S166137666
[01:51:27:553] OS ID: 12606400
[01:51:27:569] Hardware Type: P12
[01:51:27:616] Calibration ID: 12606399
[01:51:27:757] Serial Number: 5295KH07X
[01:51:27:819] Broad Cast Code: YNBD
[01:51:27:866] MEC: 0
Logged
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2800



« Reply #1 on: September 07, 2023, 07:05:58 PM »

Please help to find XDF file for GM P-12 OS : 12606400 2006 Trailblazer 4.2L 1 mb flash . I am including bin file from PCM .
thank you in advance .



[01:51:22:138] PCM Hammer 021
[01:51:22:153] Wednesday, August 30 2023 @01:51:22:15
[01:51:22:153] Initializing J2534 Device
[01:51:22:169] Loaded DLL
[01:51:22:481] Connected to the device.
[01:51:22:497] Battery Voltage is: 12.9
[01:51:22:513] Thanks for using PCM Hammer.
[01:51:27:475] VIN: 1GNET16S166137666
[01:51:27:553] OS ID: 12606400
[01:51:27:569] Hardware Type: P12
[01:51:27:616] Calibration ID: 12606399
[01:51:27:757] Serial Number: 5295KH07X
[01:51:27:819] Broad Cast Code: YNBD
[01:51:27:866] MEC: 0
I hate to be the guy to tell you but virtually ZERO public info exists on that ecu, and this forum is not the place to gather info on that ecu. I started to define a 2006 ion redline operating system 12598284 and posted my finding here  https://pcmhacking.net/forums/viewtopic.php?f=42&t=7742&start=540  checkout the last few pages and you will see that I posted my findings. If needed I can do just about anything on that ecu, you can send me a pm and I can take care of your needs. However, I will warn you now this will not be a free service, I'm all about sharing however i just don't have the free time at the moment for free development.
Logged

Giving your mom a tuneup
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)