Pages: [1]
Author Topic: 1.8t ARY changed to AJQ, can i deactivate the camshaft-adjuster with nefmoto?  (Read 2647 times)
F48118T
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2



Hello, i am new here and i have a problem with the camshaft-adjuster of my 1.8t
Sorry for my bad english.
My question is: Can i deactivate the camshaft-adjuster with nefmoto, because an exchange engine without the adjuster was built in my audi and now is the engine control lamp on?
(The original engine was the ARY and now is the AJQ build in)
Hope someone can help me Smiley
Logged
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1282




Hello, i am new here and i have a problem with the camshaft-adjuster of my 1.8t
Sorry for my bad english.
My question is: Can i deactivate the camshaft-adjuster with nefmoto, because an exchange engine without the adjuster was built in my audi and now is the engine control lamp on?
(The original engine was the ARY and now is the AJQ build in)
Hope someone can help me Smiley

Why not swap the vvt tensioner over too ? Anyway yes you can code it out but not with nefmoto, you need to edit your flash.
Logged
F48118T
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2



Why not swap the vvt tensioner over too ? Anyway yes you can code it out but not with nefmoto, you need to edit your flash.

Thanks for the answer! Grin
Can I retrofit the camshaft adjuster on an AJQ cylinder head without changing the camshafts of the ARY?
Are the camshafts and cylinder head of ARY and AJQ the same, so that the camshaft adjuster also fits the AJQ?
Logged
bororobbo
Full Member
***

Karma: +0/-2
Offline Offline

Posts: 66



The cams are the same

Sent from my SM-G955F using Tapatalk

Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.027 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)