NefMoto > Noob Zone > Noob Questions (Moderator: turboat) > B5 s4 Fast bucking/shaking @wot..?? ARMD? ASR?
Pages: [1]
« previous next »
Author Topic: B5 s4 Fast bucking/shaking @wot..?? ARMD? ASR?  (Read 5077 times)
Integrated_20
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 41
« on: November 18, 2019, 07:30:20 PM »
Wanted to see if anyone could help me out to figure out what this bucking is at wot. It just started happening out of the blue as far as i can tell.
Now ive read about armd intervention causing issues like this but im wondering if it might have something to do with the fact that im in a 00 s4 with a a-box running a m-box file with 5120 hack flashed over it. Or Could it have something to do with "asr" from mbox being that abox doesnt have any traction control? Any help would be appreciated because mt car was running so nice until this started happening
Logged
ZakDodge
Jr. Member
**

Karma: +2/-0
Offline Offline

Posts: 42
« Reply #1 on: November 18, 2019, 07:33:30 PM »
It has the 5120 hack or hit has the parameters to do the hack? Did you change your map sensor to fit the file?


Sent from my iPhone using Tapatalk
Logged
Integrated_20
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 41
« Reply #2 on: November 18, 2019, 07:55:47 PM »
I copied all nyet's values from 5120 hack 3bar file over to my map yes and Im using a bosch 3bar. I thibk when i first installed the 3bar i used nyet's actual 5120 map posted on neft and the bucking never happened but i was dealing with a different issue so wasnt a good reference to trouble shoot
Logged
ZakDodge
Jr. Member
**

Karma: +2/-0
Offline Offline

Posts: 42
« Reply #3 on: November 18, 2019, 08:00:24 PM »
I’d do some logging and try to figure out what’s going on.


Sent from my iPhone using Tapatalk
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Online Online

Posts: 12270


WWW
« Reply #4 on: November 18, 2019, 08:11:39 PM »
My guess would be accel pedal potentiometer(s), if this is a new issue that started out of the blue.

I doubt it is ARMD/ASR.

Log pedal position to make sure.

Also, you'd see a code.
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Integrated_20
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 41
« Reply #5 on: November 19, 2019, 12:28:20 AM »
Would that be due to the sensor on the accel pedal or something i need to modify in the file?  i did get a accel code a few times a couple weeks ago but it hasnt been back so i wasnt sweating it. I have a spare accel pedal if need be
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Online Online

Posts: 12270


WWW
« Reply #6 on: November 19, 2019, 12:31:35 AM »
Quote from: Integrated_20 on November 19, 2019, 12:28:20 AM
Would that be due to the sensor on the accel pedal or something i need to modify in the file?  i did get a accel code a few times a couple weeks ago but it hasnt been back so i wasnt sweating it. I have a spare accel pedal if need be

potentiometer(s) in the accel pedal.

Definitely not something you want to modify in your file.
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Integrated_20
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 41
« Reply #7 on: November 19, 2019, 12:07:52 PM »
I think you were right. Accel pedal isnt logging anything. Can i use a accel pedal from a 02 in my 00? And will swapping pedals fix that problem?
Logged
Integrated_20
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 41
« Reply #8 on: November 19, 2019, 04:21:53 PM »
Quote from: Integrated_20 on November 19, 2019, 12:07:52 PM
I think you were right. Accel pedal isnt logging anything. Can i use a accel pedal from a 02 in my 00? And will swapping pedals fix that problem?
Thank you!
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Online Online

Posts: 12270


WWW
« Reply #9 on: November 19, 2019, 05:47:59 PM »
Quote from: Integrated_20 on November 19, 2019, 12:07:52 PM
I think you were right. Accel pedal isnt logging anything. Can i use a accel pedal from a 02 in my 00? And will swapping pedals fix that problem?

Yes I believe those are swappable. I could be wrong though, might want to check with a p/n vin checker.
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Integrated_20
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 41
« Reply #10 on: November 19, 2019, 06:06:00 PM »
Ok check that. I swapped and am now logging accel but it still doing it. Feels almost like rapid wastegate opening closing and sounds like it too
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 27, 2024, 02:00:18 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.024 seconds with 18 queries. (Pretty URLs adds 0.001s, 0q)