K-TAG clone V2.23 can work with 2.33?

Pages: 1 [2]

« previous next »

Author

Topic: K-TAG clone V2.23 can work with 2.33? (Read 10267 times)

Gulfstream

Full Member

Karma: +3/-5
Offline

Offline

Posts: 232

	Re: K-TAG clone V2.23 can work with 2.33? « Reply #15 on: October 29, 2020, 01:27:54 PM »

Quote from: BlackT on October 28, 2020, 03:05:47 PM

This maybe help?
http://dius.magelan.net.ua/Bombardier/Reprogram/

It would be a good thing if I had seen it before cutting my ECU to open!
Sad


	Logged

BlackT

Hero Member

Karma: +79/-40
Offline

Offline

Posts: 1425

	Re: K-TAG clone V2.23 can work with 2.33? « Reply #16 on: October 29, 2020, 01:37:35 PM »

Quote from: Gulfstream on October 29, 2020, 01:27:54 PM

It would be a good thing if I had seen it before cutting my ECU to open!
Sad

Look at all files, looks like there is a program to flash
ST10F269

Code:

    This program is made for laboratory environments and usage by engineers knowing the device they are working with. This is a free tool which must be taken as it is, no support being ensured.

The target of this flasher is simple: A engineer develops code for one of STMicroelectronics nice embedded flash microcontrollers (like the ST10F168 and others) and wants to program it (fast and easy) from his desktop PC into the chip. If that is what you are looking for, then this program is for you.

Code:

     ---------
ST10Flasher supports following ST10 derivatives:
ST10F168, ST10F169, ST10F269


	Logged

Gulfstream

Full Member

Karma: +3/-5
Offline

Offline

Posts: 232

	Re: K-TAG clone V2.23 can work with 2.33? « Reply #17 on: October 29, 2020, 01:52:50 PM »

Quote from: BlackT on October 29, 2020, 01:37:35 PM

Look at all files, looks like there is a program to flash
ST10F269

Code:

    This program is made for laboratory environments and usage by engineers knowing the device they are working with. This is a free tool which must be taken as it is, no support being ensured.

The target of this flasher is simple: A engineer develops code for one of STMicroelectronics nice embedded flash microcontrollers (like the ST10F168 and others) and wants to program it (fast and easy) from his desktop PC into the chip. If that is what you are looking for, then this program is for you.

Code:

     ---------
ST10Flasher supports following ST10 derivatives:
ST10F168, ST10F169, ST10F269

Iwill buy this programmer to make a test!!!

Thanks for information


	Logged

Gulfstream

Full Member

Karma: +3/-5
Offline

Offline

Posts: 232

	Re: K-TAG clone V2.23 can work with 2.33? « Reply #18 on: October 29, 2020, 01:53:55 PM »

Quote from: BlackT on October 28, 2020, 03:05:47 PM

This maybe help?
http://dius.magelan.net.ua/Bombardier/Reprogram/

all these pisctures are to use in ktag? or will fit to all programmers?

thanks for pictures and video!


	Logged

Gulfstream

Full Member

Karma: +3/-5
Offline

Offline

Posts: 232

	Re: Re: K-TAG clone V2.23 can work with 2.33? « Reply #19 on: January 12, 2021, 04:38:54 PM »

Quote from: xXxCryxXx on October 18, 2020, 02:22:47 AM

Buy Ori Tool, if you brick your ecu while writing that work costs a lot of Money

X-Boost Performance

I tried with original ktag and dont works.

Its a so different ECU, have few information.

so far i don't know which programmer can read this ecu. So there's no way to buy original or fake programmer
Sad


	Logged

Pages: 1 [2]

« previous next »

Jump to:

Navigation

Personal Tools

November 23, 2024, 08:51:44 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search