Dev Blog
Forum
Wiki
About
NefMoto
>
Technical
>
Tuning
>
Community Projects
>
B7 2.7T Swap Close Fuel Cap PLEASE HELP
Pages: [
1
]
« previous
next »
Author
Topic: B7 2.7T Swap Close Fuel Cap PLEASE HELP (Read 6416 times)
Adam AC autos
Newbie
Karma: +0/-2
Offline
Posts: 3
B7 2.7T Swap Close Fuel Cap PLEASE HELP
« on: December 01, 2020, 12:52:43 PM »
Hello, if someone can point me in the right direction of some information that might be helpful here that would be great. I've been trying to get this message off the dash for months now
CLOSE FUEL CAP!!
I know it's to do with the Evap and LDP but removing codes obviously don't work . I need to switch off Diagnostics in the ECU for Evap and Leak Pump I think......
Please it's been on my dash months ☺️
Thanks everyone
I have attached original and the file iv been trying to remove the message from. It's tuned
Thanks again
Logged
thedrill
Full Member
Karma: +12/-3
Offline
Posts: 139
Re: B7 2.7T Swap Close Fuel Cap PLEASE HELP
« Reply #1 on: December 01, 2020, 09:33:47 PM »
Are you sure its not the sensor on the filler neck?
IIRC There is a couple of wires under the rear seat that you can unplug to get rid of the message.
Logged
Adam AC autos
Newbie
Karma: +0/-2
Offline
Posts: 3
Re: B7 2.7T Swap Close Fuel Cap PLEASE HELP
« Reply #2 on: December 02, 2020, 03:39:28 PM »
I have looked for the wirers that I've seen me mentioned before. But I don't have the cap with the magnet In etc .
This message only appears after I swapped to M-Box software for tuning. Because I couldn't find a XDF for my ORI
It apparently switched off somewhere in the file for readiness checks and the ECUs diagnostics of the Evap system
Thanks for the reply!
Logged
thedrill
Full Member
Karma: +12/-3
Offline
Posts: 139
Re: B7 2.7T Swap Close Fuel Cap PLEASE HELP
« Reply #3 on: December 02, 2020, 04:27:06 PM »
They use a B6 cluster in a B7 to extinguish the gas cap light... with the 2.7t swap.
Not sure if turning off stuff in the ecu will fix anything.
Logged
Joelvw
Newbie
Karma: +0/-0
Offline
Posts: 2
Re: B7 2.7T Swap Close Fuel Cap PLEASE HELP
« Reply #4 on: December 26, 2020, 10:34:39 AM »
b6 s4 cluster will resolve the issue but requires new keys as diferent imobilser chip
Logged
Pages: [
1
]
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> Introductions
=> General Discussion
-----------------------------
Noob Zone
-----------------------------
=> Noob Questions
=> Noob Guides and FAQs
-----------------------------
Technical
-----------------------------
=> NefMoto Software
=> Tuning
===> Documents & Helpers & How To's
===> Community Projects
=> Diagnostics
=> Flashing and Chipping
=> Cluster and Immobilizer
===> ECU EEPROM images
===> Original Cluster dumps
===> Original Cluster dump requests
=> Data Logging
=> Reverse Engineering
=> Communication Protocols
-----------------------------
ECU Files
-----------------------------
=> ECU Definition Files
===> ECU Definition File Requests
=> Original ECU Files
===> Original ECU File Requests
=> Checksum Update Requests
-----------------------------
Vehicles
-----------------------------
=> Vehicle Tech
=> Project Cars
-----------------------------
Regional
-----------------------------
=> Canadian Regional Discussion
=> US Regional Discussion
-----------------------------
Classifieds
-----------------------------
=> For Sale
=> Wanted
=> Services
-----------------------------
Miscellaneous
-----------------------------
=> Off Topic
=> Forum Tech Support
=> Bizarro Messages Posted by Bots and Spammers
Navigation
Home
Help
Login
Register
Personal Tools
November 25, 2024, 11:12:37 AM
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Search
Advanced Search
Loading...
