Quick Question ME7.5 1.8T ecu swapping

Pages: [1]

« previous next »

Author

Topic: Quick Question ME7.5 1.8T ecu swapping (Read 1831 times)

dspl1236

Jr. Member

Karma: +2/-0
Offline

Offline

Posts: 30

	Quick Question ME7.5 1.8T ecu swapping « on: April 10, 2022, 03:36:34 PM »

I am wrapping up a wideband AWP 1.8t swap into a Mk2.

I have a shorted throttle ECU 032RN out of a 6speed car. The tuned file has been backed up and does work on other 6speed ECU's. But has had no start issues on 5speed cars ECU's(032HN).

I cant remember if this is a immo2 vs immo3 file vs ECU specific issue.

Its been a while...but can I just flash any manual/auto wideband 1.8t ECU with this file? Say a 2005 Beetle Auto (032QS) ECU?

I have 2x B5.5 170hp Passat ECU's 4B0906018CM/DA Automatic but from a returnless fuel system car...have a feeling this would be a no-go too.

Before buying an ECU to flash...kinda wanted to check in with you guys.


« Last Edit: April 10, 2022, 03:39:06 PM by dspl1236 »	Logged

dspl1236

Jr. Member

Karma: +2/-0
Offline

Offline

Posts: 30

	Re: Quick Question ME7.5 1.8T ecu swapping « Reply #1 on: April 10, 2022, 09:24:27 PM »

Cant hurt to just try. Both 03+ ecu's

Also did the quick byte patch for the Control Module Programming not finished as I remember this was an issue in the past with this RN file.

==============================================================================
me7check v1.12 (c) mki, 06/2004-05/2012
Checking file Z:\Archive\Google Drive\home flashing\ME7\18CM.Bin (size=1048576)
Reading Version Strings...
-> Bootrom Version = 05.12
-> EPK = 40/1/ME7.5/3/4012.31//24E/Dst06o/020402//
-> Contents of ECUID data table:
- '0261207435' (SSECUHN)
- '1037366150' (SSECUSN)
- '4B0906018CM ' (VAG part number)
- '0006' (VAG sw number)
- '1.8L R4/5VT ' (engine id)
-> Contents of ECUID data table:
- 'HW_MAN004'

-> No errors found. File is OK. *********************

==============================================================================
me7check v1.12 (c) mki, 06/2004-05/2012
Checking file Z:\Archive\Google Drive\home flashing\ME7\032RN2.bin (size=1048576)
Reading Version Strings...
-> Bootrom Version = 05.12
-> EPK = 42/1/ME7.5/120/4013.00//24D/Dst01o/160603/
-> Contents of ECUID data table:
- '0261208450' (SSECUHN)
- '1037368613' (SSECUSN)
- '06A906032RN ' (VAG part number)
- '0001' (VAG sw number)
- '1.8L R4/5VT ' (engine id)
-> Contents of ECUID data table:
- 'HW_MAN004'

-> No errors found. File is OK. *********************


	Logged

Sandstorm3k

Sr. Member

Karma: +10/-14
Offline

Offline

Posts: 402

	Re: Quick Question ME7.5 1.8T ecu swapping « Reply #2 on: April 11, 2022, 01:38:14 PM »

Quote from: dspl1236 on April 10, 2022, 03:36:34 PM

Passat ECU's aren't waterproof but it will work in case of an emergency I suppose

Just get transverse ECU 1024kb and you will be good to go


	Logged

dspl1236

Jr. Member

Karma: +2/-0
Offline

Offline

Posts: 30

	Re: Quick Question ME7.5 1.8T ecu swapping « Reply #3 on: April 15, 2022, 02:13:47 PM »

No go.

The CPU's are different.

Infineon B59233(AWP 032RN) vs B59271(AWM 018CM)

233 file on the 271 wont even communicate to VCDS. But Ktag was still able to pull info via bootmode.

Well Ill just have to snag a transverse 032 ecu.


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 26, 2024, 03:43:43 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search