Pages: [1]
Author Topic: Engine load < engine load requested  (Read 1917 times)
Dejw0089
Full Member
***

Karma: +2/-6
Offline Offline

Posts: 100



« on: May 16, 2022, 01:09:01 PM »

Hi.
Can anyone give me a point what can cause low engine load?
And turbo didnt hit boost fast. its k03s turbo so normally boost is on low rpms fast.
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Online Online

Posts: 12270


WWW
« Reply #1 on: May 16, 2022, 01:19:00 PM »

Limp. 10% WGDC

Codes?
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Dejw0089
Full Member
***

Karma: +2/-6
Offline Offline

Posts: 100



« Reply #2 on: May 16, 2022, 11:23:44 PM »

Limp. 10% WGDC

Codes?
No WGDC is 95% when throttle is 100%
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Online Online

Posts: 12270


WWW
« Reply #3 on: May 16, 2022, 11:43:41 PM »

oops sorry, didn't see it was 9.5E1

yes, you have a huge boost leak or your wastegates are stuck open.

pressure test, check DVs, check n75, try disconnecting wg lines
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Dejw0089
Full Member
***

Karma: +2/-6
Offline Offline

Posts: 100



« Reply #4 on: May 16, 2022, 11:46:28 PM »

Ok. Thanks  Grin
I make tune from ori file and wierd is that before on (locked) tune car have 1.1bar boost peak but i think someone off some things and make hard settings to reach that target.
Logged
Dejw0089
Full Member
***

Karma: +2/-6
Offline Offline

Posts: 100



« Reply #5 on: May 18, 2022, 10:02:32 PM »

oops sorry, didn't see it was 9.5E1

yes, you have a huge boost leak or your wastegates are stuck open.

pressure test, check DVs, check n75, try disconnecting wg lines

You have right nyet  Grin Progressive leak with magician connect n75 valve.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 17 queries. (Pretty URLs adds 0s, 0q)