I've used ME7sum several times before and it has worked flawlessly, but now that im trying to use it on an 018CB file, i get this error:
*** ABORTING! 1 uncorrectable error(s) in inn.bin! ***
I've tried running the program as administrator, on several diffrent computers but that doesent seem to be the problem. It looks like the program cant find the CRC tables?
The file im editing is the 018CB that TTQS shared that is supposedly fully defined. But ESKONF wasnt in there so i had to add that myself, i think i did this correctly but it was my first time doing this.
When i was altering several diffrent maps i got an error from WinOLS that stated the maps i was editing was in "unprotected memory areas" maybe this has something to do with it?
Any help will be greatly appriciated
This is the full error i get:
C:\Users\Sigurd Myhre\Desktop\ECU\Me7sum>me7sum inn.bin out.bin
ME7Sum (v1.1.2) [Management tool for Bosch ME7.x firmwares]
Inspiration from Andy Whittaker's tools and information.
Written by 360trev and nyet [BSD License Open Source].
Attempting to open firmware file 'inn.bin'
Step #1: Reading ROM info ..
Searching for EPK signature...OK
Searching for ECUID table...OK
EPK : '41/1/ME7.5/5/4019.XX//X24bi/Dst5i/050302/'
Part Number : '8N0906018CB '
Engine ID : '24QVCGB1.HEX '
SW Version : 'EU3 '
HW Number : '0261206795'
SW Number : '0000000000'
Step #2: Reading ROMSYS ..
Startup section: word[0x008000]+word[0x00FFFE]
@08038 Add=0x0000C861 CalcAdd=0x0000C861 ADD OK
All param page: word[0x010000]+word[0x01FFFE]
@01be18 Add=0x00971D CalcAdd=0x00971D ADD OK
Step #3: Finding CRC table(s) ..
Searching for CRC table(s)...missing
Searching for CRC table(s) using fallback...UNDEFINED
Step #3: ERROR! Couldn't find CRC table(s)
Step #4: Reading RSA signatures ..
Searching for RSA offset #0...OK
Searching for RSA offset #1...OK
Signature: @8fe84-8ff04
Modulus: @167c0-16840
Exponent: @16840 = 3
Searching for MD5 ranges...OK
MD5 Block Offset Table @1679c [32 bytes]:
1) 0x00010002-0x00013FFE
2) 0x00014252-0x00017F4E
3) 0x00018192-0x0001FBDC
4) 0x00026A00-0x0002FFFC
EncrMD5: 72 c3 8b 45 df 0c de 0f 9c 67 54 bb f2 be 10 e6
CalcMD5: 4e c1 02 18 6e f3 e6 d1 af d3 0e 26 88 b8 e4 2f
** FIXED **
Step #5: Reading Main Data CRC/Checksums ..
Searching for main data CRC pre block...missing
Searching for main data CRC/csum blocks...OK
Searching for main data CRC offsets...missing
Searching for main data checksum offsets...OK
Main Checksums:
1) 0x010002-0x013FFE CalcCSM: 001328ED
2) 0x014252-0x017F4E CalcCSM: 00287E26
3) 0x018192-0x01FBDC CalcCSM: 00446B6E
4) 0x026A00-0x02FFFC CalcCSM: 00C5561A
@8ff04 CSM: 00C569FF CalcCSM: 00C5561A ** FIXED **
Step #6: ROMSYS Program Pages
Program pages: 8k page first+last in 0x0000-0xFFFF and 0x20000-0xFFFFF
@00803c Add=0xA75A0F CalcAdd=0xA75A0F ADD OK
Step #7: Reading Main Program Checksums ..
Searching for main program checksum..OK
ROM Checksum Block Offset Table @1f9ac [16 bytes]:
1) 0x000000-0x00FBFF CalcChk: 48D0A117
0x00FC00-0x01FFFF CalcChk: 214681E1 CalcCRC: 2A01E730 SKIPPED
2) 0x020000-0x0FFFFF CalcChk: 44F94FC1
@fffe0 Chk: 4503017D CalcChk: 44F94FC1 ** FIXED **
Step #8: Reading Multipoint Checksum Blocks ..
Searching for multipoint block descriptor #1...missing
Searching for multipoint block descriptor #2...OK
1) <1fbde> 0x000000-0x003FFF Chk: 0FA0F5CF Boot: (whitelisted) OK
2) <1fbee> 0x004000-0x007FFF Chk: 0F4716B3 Boot: (whitelisted) OK
3) <1fbfe> 0x000000-0x003FFF Chk: 0FA0F5CF CalcChk: 0FA0F5CF OK
..........
64) <1ffce> 0x0F4000-0x0F7FFF Chk: 1FFFE000 CalcChk: 1FFFE000 OK
65) <1ffde> 0x0F8000-0x0FBFFF Chk: 1FFFE000 CalcChk: 1FFFE000 OK
66) <1ffee> 0x0FC000-0x0FFFFF Chk: 1FFDE002 CalcChk: 1FFDE002 OK
Multipoint #2: [66 blocks x <16> = 1056 bytes]
Step #9: Looking for rechecks ..
*** Found 70 checksums in inn.bin
*** ABORTING! 1 uncorrectable error(s) in inn.bin! ***
