Can to PID address

Pages: [1]

« previous next »

Author

Topic: Can to PID address (Read 4310 times)

Fero

Newbie

Karma: +0/-1
Offline

Offline

Posts: 3

	Can to PID address « on: March 09, 2023, 03:26:53 PM »

Hi All

Im trying to create an RPI to monitor readings from my Audi A4 B7 using Torque Pro. I want to add some custom PIDs like Engine Oil Temp and Gear Box Fluid Temp which are not available in Torque Pro. I have tried sniffing the CAN Bus and read some data but was unable to understand or convert them. Does anyone have an idea or can point me in the right direction?
Sorry if I posted in the wrong place.


	Logged

fknbrkn

Hero Member

Karma: +185/-23
Offline

Offline

Posts: 1454

mk4 1.8T AUM

	Re: Can to PID address « Reply #1 on: March 09, 2023, 09:54:37 PM »

Quote from: Fero on March 09, 2023, 03:26:53 PM

MED9 Funktionsrahmen, CAN section got all that you need
Its better to sniff canbus for sure


	Logged

Fero

Newbie

Karma: +0/-1
Offline

Offline

Posts: 3

	Re: Can to PID address « Reply #2 on: March 10, 2023, 02:07:35 AM »

Quote from: fknbrkn on March 09, 2023, 09:54:37 PM

MED9 Funktionsrahmen, CAN section got all that you need
Its better to sniff canbus for sure

Thank you for the reply. Ill search there.


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 23, 2024, 02:09:38 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search