NefMoto > Technical > Flashing and Chipping > is ecu firmware 4D0907560DA firmware from 3.2L 022906032BF possible?
Pages: [1]
« previous next »
Author Topic: is ecu firmware 4D0907560DA firmware from 3.2L 022906032BF possible?  (Read 2896 times)
yutu
Jr. Member
**

Karma: +1/-2
Offline Offline

Posts: 29
If the 2006 Tuareg ecu v8 4.2 4D0907560DA me7.1.1 flash the firmware from the Tuareg 3.2l 022906032BF is also me7.1.1 . Will the 3.2 motor work ? I know that on the EDC 15 blocks, different firmware from different motors are sewn up and the motor works fine, and the error is only written on the block, the control unit is faulty, but it does not affect anything
Logged
thedrill
Full Member
***

Karma: +12/-3
Offline Offline

Posts: 139
« Reply #1 on: April 12, 2023, 06:00:48 PM »
You are missing 2 x O.
Logged
adam-
Hero Member
*****

Karma: +123/-33
Offline Offline

Posts: 2179
« Reply #2 on: April 12, 2023, 09:31:20 PM »
One is an 8 cylinder, one a 6?
Logged
yutu
Jr. Member
**

Karma: +1/-2
Offline Offline

Posts: 29
« Reply #3 on: April 14, 2023, 03:05:53 AM »
Quote from: adam- on April 12, 2023, 09:31:20 PM
One is an 8 cylinder, one a 6?
without a difference. the edc-15 is also from 2.5 tdi 5-cylinder, but the firmware of 4 cylinders 1.9 tdi works in it
Logged
yutu
Jr. Member
**

Karma: +1/-2
Offline Offline

Posts: 29
« Reply #4 on: April 14, 2023, 03:27:23 AM »
Quote from: thedrill on April 12, 2023, 06:00:48 PM
You are missing 2 x O.
  I have a v8 engine control unit and I want the abs unit in a Tuareg with a 2.3l engine to work, for this I want to run it in the mode of two control units. But we need firmware with manual transmission . And she was only on the 3.2 engine. .
Logged
prj
Hero Member
*****

Karma: +1072/-480
Offline Offline

Posts: 6035
« Reply #5 on: April 14, 2023, 03:34:08 AM »
Quote from: yutu on April 14, 2023, 03:05:53 AM
without a difference. the edc-15 is also from 2.5 tdi 5-cylinder, but the firmware of 4 cylinders 1.9 tdi works in it
Dude, EDC15VM has no concept of cylinders.
All it does is control the plunger and the advance on the pump. It does not matter how many cylinders there are.

The hardware is different on a V8, the I/O is mapped differently. There are actual physical drivers for the injectors and ignition coils in a gasoline ECU with sequential injection.
Stop comparing things that can't be compared.

It's not going to work, end of story.
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 23, 2024, 04:11:31 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.028 seconds with 17 queries. (Pretty URLs adds 0s, 0q)