NefMoto > Technical > Flashing and Chipping > 8D0907557C immo defeat help please
Pages: 1 [2]
« previous next »
Author Topic: 8D0907557C immo defeat help please  (Read 19046 times)
airtite
Hero Member
*****

Karma: +13/-3
Offline Offline

Posts: 741
« Reply #15 on: September 21, 2012, 07:29:25 AM »
well no I am not sure thats why I asked for help further up but to no avail, I have posted as much info as possible and would love some help!
Logged
NMS
Full Member
***

Karma: +6/-3
Offline Offline

Posts: 50
« Reply #16 on: September 21, 2012, 07:34:56 PM »
Quote from: airtite on September 21, 2012, 07:29:25 AM
well no I am not sure thats why I asked for help further up but to no avail, I have posted as much info as possible and would love some help!
If I remember correctly, the 906/907 series had 95c40. And for that I'd use UPA.
Logged
airtite
Hero Member
*****

Karma: +13/-3
Offline Offline

Posts: 741
« Reply #17 on: September 21, 2012, 11:57:04 PM »
Quote from: Torsen-TTune on September 21, 2012, 07:34:56 PM
If I remember correctly, the 906/907 series had 95c40. And for that I'd use UPA.

Thanks for the help, I dont see any devices under my gq-4x for that chip 95c40?
Logged
NMS
Full Member
***

Karma: +6/-3
Offline Offline

Posts: 50
« Reply #18 on: September 22, 2012, 09:20:10 PM »
Quote from: airtite on September 21, 2012, 11:57:04 PM
Thanks for the help, I dont see any devices under my gq-4x for that chip 95c40?
Err, it has 2 names, one of which is actually 25c40.

Should note, for future reference: 24, 25 and 95 are all the same series with the same pinouts (unless reversed, and you don't need to worry about this).


Looked in GQ, and it lists it as a "25c040".
Logged
airtite
Hero Member
*****

Karma: +13/-3
Offline Offline

Posts: 741
« Reply #19 on: September 23, 2012, 01:17:47 AM »
again thank you for the help, my last question in the pictures above could you tell me whether its the chip on the top of the board or the bottom?
Logged
airtite
Hero Member
*****

Karma: +13/-3
Offline Offline

Posts: 741
« Reply #20 on: September 23, 2012, 01:24:17 AM »
Thank you Thank you Thank you, OK I managed to get a 2nd read from the chip on the top of the board which I have attached please can someone confirm whether this is the correct read?
Logged
matchew
Hero Member
*****

Karma: +47/-22
Offline Offline

Posts: 503
« Reply #21 on: September 23, 2012, 02:14:59 AM »
Corrupt read.
Logged
airtite
Hero Member
*****

Karma: +13/-3
Offline Offline

Posts: 741
« Reply #22 on: September 24, 2012, 09:07:11 AM »
Quote from: matchew on September 23, 2012, 02:14:59 AM
Corrupt read.

what would a corrupt read mean? Am I using the wrong chip? Did I stuff the contents of the chip up by trying other chip types in my gq?
Logged
matchew
Hero Member
*****

Karma: +47/-22
Offline Offline

Posts: 503
« Reply #23 on: September 24, 2012, 09:51:06 AM »
Content is ~junk and the size is wrong.
Logged
NMS
Full Member
***

Karma: +6/-3
Offline Offline

Posts: 50
« Reply #24 on: September 24, 2012, 05:42:34 PM »
Quote from: airtite on September 24, 2012, 09:07:11 AM
what would a corrupt read mean? Am I using the wrong chip? Did I stuff the contents of the chip up by trying other chip types in my gq?
Yea, it's corrupted inside out.
Logged
Pages: 1 [2]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 13, 2024, 02:08:44 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)