Hydraulic vvt 1.8t

Pages: [1]

« previous next »

Author

Topic: Hydraulic vvt 1.8t (Read 4387 times)

terminator

Sr. Member

Karma: +15/-4
Offline

Offline

Posts: 425

	Hydraulic vvt 1.8t « on: October 07, 2013, 12:30:51 PM »

I know that some 1.8t owners swap stock vvt to hydraulic vvt. So it shows DTC.

Tell me please I'm I right that for correct swapping (I dont mean only DTC) I should set CDNWS to 0 (from 2)? Or I should change something else?

Thanx!


« Last Edit: October 07, 2013, 12:34:49 PM by terminator »	Logged

ddillenger

Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: Hydraulic vvt 1.8t « Reply #1 on: October 07, 2013, 12:46:42 PM »

You need to set CDNWS=0, and set the proper bit pairs in ESKONF. It's covered in the s4 wiki.


	Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM

terminator

Sr. Member

Karma: +15/-4
Offline

Offline

Posts: 425

	Re: Hydraulic vvt 1.8t « Reply #2 on: October 07, 2013, 01:54:20 PM »

Thank you very much, ddillenger!

But one thing... I'm not 100% sure that NWS is the last bit pair. I'm not sure about last 4 bites at all, cause they are not the same from file to file according to functionshramen.

Is it ok if I wont change ESKONF and will change only CDNWS and DTC (CLANWS?)?


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 15, 2024, 08:32:46 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search