Dump valve releasing too early on S3 8l BAM

Pages: [1]

« previous next »

Author

Topic: Dump valve releasing too early on S3 8l BAM (Read 6505 times)

baldwin02002

Newbie

Karma: +0/-0
Offline

Offline

Posts: 18

	Dump valve releasing too early on S3 8l BAM « on: September 24, 2013, 12:45:15 PM »

Hi guys, i bought an S3 BAM and the condition was looking good. But the car pulls good until 6000rpm and then a dump valve releases when the car is still on full throttle. I dont get any errors after that.

When i was doing checks i realized that a turbo inlet horse has teared into peaces where it clamps on the turbo inlet. Will this be causing a problem as a MAF might be having a false reading due to air sucking after an airflow meter.

I have attached a map that i have downloaded using Genius. Please help me to analyze if a map looks original or tuned as this will help me to find a problem.

Your help will be appreciated.

Thank you.


	Logged

baldwin02002

Newbie

Karma: +0/-0
Offline

Offline

Posts: 18

	Re: Dump valve releasing too early on S3 8l BAM « Reply #1 on: September 24, 2013, 12:52:36 PM »

On addition to my topic - A car does not drive over 200km/h as it it starts cutting. Thanks


	Logged

Nottingham

Full Member

Karma: +13/-1
Offline

Offline

Posts: 204

	Re: Dump valve releasing too early on S3 8l BAM « Reply #2 on: September 24, 2013, 01:30:42 PM »

The map is original.

The car is not supposed to have a dump valve, but a recycling bypass valve instead.
In case there is a dump valve installed, remove and replace it with a standard bypass valve.

And yes, atleast some of the issues are definitely caused by the teared TIP.


	Logged

catbed

Sr. Member

Karma: +8/-2
Offline

Offline

Posts: 300

	Re: Dump valve releasing too early on S3 8l BAM « Reply #3 on: September 24, 2013, 01:57:50 PM »

Before others tear you apart, fix any hardware problems before tuning.


	Logged

baldwin02002

Newbie

Karma: +0/-0
Offline

Offline

Posts: 18

	Re: Dump valve releasing too early on S3 8l BAM « Reply #4 on: September 25, 2013, 02:48:42 AM »

Thank you. I will try that and give you an update. Thanks


	Logged

baldwin02002

Newbie

Karma: +0/-0
Offline

Offline

Posts: 18

	Re: Dump valve releasing too early on S3 8l BAM « Reply #5 on: November 07, 2013, 10:22:38 AM »

Hi guys, i have reflushed an ECU and the car is back to normal. There was a bit of a leak which i managed to fix. Thanks very much for your help.


	Logged

IamwhoIam

Hero Member

Karma: +49/-105
Offline

Offline

Posts: 1055

	Re: Dump valve releasing too early on S3 8l BAM « Reply #6 on: November 07, 2013, 10:25:22 AM »

Flushing always helps!


	Logged

I have no logs because I have a boost gauge (makes things easier)

ddillenger

Hero Member

Karma: +639/-21
Offline

Offline

Posts: 5640

	Re: Dump valve releasing too early on S3 8l BAM « Reply #7 on: November 07, 2013, 10:41:37 AM »

Quote from: IamwhoIam on November 07, 2013, 10:25:22 AM

Flushing always helps!

I agree at home. However when out and about I prefer to leave the flushing for the next guy. Gives him a sense of accomplishment.


	Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM

userpike

Hero Member

Karma: +22/-1
Offline

Offline

Posts: 763

	Re: Dump valve releasing too early on S3 8l BAM « Reply #8 on: November 07, 2013, 11:10:22 AM »

Quote from: ddillenger on November 07, 2013, 10:41:37 AM

I agree at home. However when out and about I prefer to leave the flushing for the next guy. Gives him a sense of accomplishment.

lol

Thanks D!


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

July 07, 2024, 08:25:17 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search