NefMoto > Technical > NefMoto Software > 480997020BX AWM 2001 Avant
Pages: [1]
« previous next »
Author Topic: 480997020BX AWM 2001 Avant  (Read 6053 times)
em.Euro.R18
Full Member
***

Karma: +4/-5
Offline Offline

Posts: 219
« on: December 21, 2013, 01:46:55 PM »
I'm trying to make a check list for getting the .bin off this car without issue. Now I'm not as tech savy(as far as running programs on here) as most of you on here but I'm learning as I go. This is a wideband ecu with VVT.

1.) Which memory layout should I choose? On the reference chart I don't see a layout for this unless its no different then the TT or A3. AM29F800 seems to be the option I would choose when loading ECU info? please correct me if I'm wrong. I should have to do this in boot mode correct?

2.) at this point am I good to go? I've come across some threads that some had to pull the fuse to the cluster.
« Last Edit: December 21, 2013, 01:49:14 PM by em.Euro.R18 » Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #1 on: December 21, 2013, 02:08:59 PM »
Nefmoto, non bootmode, 29F800BB. Hit CONNECT, select the FLASHING tab, load the memory layout (in the nefariousmotorsports directory), then hit FULL READ FLASH.

When it's done reading, it'll prompt you for a name to save the file as.
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
em.Euro.R18
Full Member
***

Karma: +4/-5
Offline Offline

Posts: 219
« Reply #2 on: December 21, 2013, 02:09:35 PM »
I went ahead a installed the latest version of nefmoto and it worked right off the bat selecting that layout Shocked. Aparently the ecu production # is 4B0906018CH (dealer either was wrong or they have a few part numbers for this particular model/year).
Logged
em.Euro.R18
Full Member
***

Karma: +4/-5
Offline Offline

Posts: 219
« Reply #3 on: December 21, 2013, 02:13:14 PM »
Quote from: ddillenger on December 21, 2013, 02:08:59 PM
Nefmoto, non bootmode, 29F800BB. Hit CONNECT, select the FLASHING tab, load the memory layout (in the nefariousmotorsports directory), then hit FULL READ FLASH.

When it's done reading, it'll prompt you for a name to save the file as.


I jumped the gun and seems like all went well on the 29F800 not the 29F800BB 2min 30sec which is wayyyy faster then what I'm used to with maestro. Should I reread the file in other format? Or would it not connect with the wrong memory layout?
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #4 on: December 21, 2013, 02:14:31 PM »
It's fine. Just use 29F800BB henceforth.
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 22, 2024, 09:53:52 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 18 queries. (Pretty URLs adds 0s, 0q)