Wiring New Diagnostic Port- pin connectors

Pages: [1]

« previous next »

Author

Topic: Wiring New Diagnostic Port- pin connectors (Read 5512 times)

phila_dot

Hero Member

Karma: +172/-11
Offline

Offline

Posts: 1709

	Wiring New Diagnostic Port- pin connectors « on: May 01, 2011, 11:56:59 AM »

I have a new OEM Audi diagnostic port (female obviously) part number 8D0-972-695 and cannot find the correct pin connectors anywhere.

What pin connectors should be used and where to get them?

I will be using this in my bench harness.


	Logged

julex

Hero Member

Karma: +79/-4
Offline

Offline

Posts: 923

	Re: Wiring New Diagnostic Port- pin connectors « Reply #1 on: May 01, 2011, 12:13:20 PM »

Quote from: phila_dot on May 01, 2011, 11:56:59 AM

Sticky on top, "bench flashing"... Pinouts are there...


	Logged

Tony@NefMoto

Administrator
Hero Member

Karma: +131/-4
Offline

Offline

Posts: 1389

2001.5 Audi S4 Stage 3

	Re: Wiring New Diagnostic Port- pin connectors « Reply #2 on: May 01, 2011, 12:21:03 PM »

I have bought parts from CarPlugs.com in the past: http://www.carplugs.com

There is also Obd2Cables.com: http://www.obd2cables.com


« Last Edit: May 01, 2011, 12:22:59 PM by Tony@NefMoto »	Logged

Remember you have to log in if you want to see the file attachments!
Info or questions, please add to the wiki: http://www.nefariousmotorsports.com/wiki
Follow NefMoto developments on Twitter: http://twitter.com/nefmoto

phila_dot

Hero Member

Karma: +172/-11
Offline

Offline

Posts: 1709

	Re: Wiring New Diagnostic Port- pin connectors « Reply #3 on: May 01, 2011, 12:31:54 PM »

Quote from: julex on May 01, 2011, 12:13:20 PM

Quote from: phila_dot on May 01, 2011, 11:56:59 AM

Sticky on top, "bench flashing"... Pinouts are there...

Thanks, but not what I'm looking for. I need the physical pin connectors.

Quote from: Tony@NefMoto on May 01, 2011, 12:21:03 PM

I have bought parts from CarPlugs.com in the past: http://www.carplugs.com

There is also Obd2Cables.com: http://www.obd2cables.com

Thanks Tony.

That was all I could find as well, but I was hoping to be able to find them local. I guess I will just have to place an order or get one with a pig-tail from the junkyard.


	Logged

coreyj03

Full Member

Karma: +10/-5
Offline

Offline

Posts: 173

	Re: Wiring New Diagnostic Port- pin connectors « Reply #4 on: May 01, 2011, 07:00:30 PM »

you could buy the pins from the dealer... probably around $20 for 2 pins with about 2 feet of wire. best bet is to just go to junk yard for a couple bucks.


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

September 27, 2024, 04:05:11 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search