I have a 06A906032LP ecu in a 1.8t AWP Jetta. Using me7logger (VisualMe7Logger) I've created an ecu file from my stock bin.  It does not list boost PIDs.. lditv_w, ldptv, ldrdtv are not present.  I've done the same ecu file creation with stock bins that I have found here... all the same- no boost PID data.  Are these buried somewhere in the bin file at some secret address?  Or are they labeled as something different?
Any tips on how to find them? 
thank you!

For 06A906032LP_0005_366194

lditv_w     384BF4  [LDR, Tastverhдltnis vom I-Regler ]
ldptv_w    384BF6   [LDR, Tastverhдltnis vom P-Regler]
ldrdtv_w   384BF8  [LDR Tastverhдltnis vom D-Regler]
ldrkd_w    384BFA   [LDR-Reglerparameter fьr D-Anteil]
ldrki_w     384BFC  [LDR-Reglerparameter fьr I-Anteil]
ldrkp_w    384BFE   [LDR-Reglerparameter fьr P-Anteil]

Not only do you need a tool - you also need to have a dam/a2l file for your ecu
Old versions "diagra" software tool can extract from damos files the list of RAM cells as a separate text file.

And this list is valid for concrete version of ecu firmware.
For example 06A906032LP_0007_367518 will use another addresses for the same parameters.

I am happy to report that these addresses appear to work in my logging configs.
My ECU is a 06A906032LP 0261207955 1037366194 005 for reference. 
I have just two additional questions:
why do some variable names have a _w after them and some do not? 
and what does the  366194 number refer to in  06A906032LP_0005_366194 ?  I know I'm 005 but I don't see a 3xxxxx number reported anywhere.
thanks!