Im using the Argdubs tool and get this error
C:\Users\User\Desktop\boot>prog.exe --OBD -r -p3 -b9600 95040.bin
Ver: 1.31
Com Port: 3
Baud Rate: 10400
Opening COM3 ... OK
Initiating communication ... FAIL. (error=0x07)
Closing COM3
I'm trying to change the baud rate but have had no luck, i tried moving the b9600 to after -r but this makes no difference
the port baud rate on the pc is 9600 , i cant select 10400 on the PC
any idea why i'm getting this error ?
could it be cable related ?
i have tried , kkl, ftdi (used with nef), galletto, mpps
Steve
I never had a problem communicating. Just failed the read in OBD mode. I may update drivers and try again as mine are from 07/2013.
Although I did the job for immo off. If like to see if the same file I wrote in, is in the chip.
