Boost Profile

Pages: [1]

« previous next »

Author

Topic: Boost Profile (Read 3865 times)

aef

Hero Member

Karma: +69/-46
Offline

Offline

Posts: 1598

	Boost Profile « on: July 20, 2015, 04:00:38 AM »

Hi,

due to lack of attention over here: http://nefariousmotorsports.com/forum/index.php?topic=8617.0title=
i created this noob thread.

We have 98ron fuel here and the car is my daily driver.
Its a 1.8t converted to 2liter with K04-064 turbo from the S3 8P.
(3 inch from turbo with 100cpsi cat)

How should the boost on a wot run look like to NOT kill the turbo?


	Logged

Beaviz

Full Member

Karma: +8/-4
Offline

Offline

Posts: 190

	Re: Boost Profile « Reply #1 on: July 20, 2015, 06:38:43 AM »

That turbo is capable of more than your stock MAP sensor will measure. But it is also known to surge on the 2.0 TFSIs between 3000-4000rpm. So keep that in mind when doing the mapping. E.g. APR keep the boost below 1.3bar under 4000rpm and then raise the boost above. Usually the most powerfull K04-064 run about 1.7-1.8 bar.

But beware of the stock rods in the 1.8t and do the 5120 hack if you want to run that kind of boost.


	Logged

adam-

Hero Member

Karma: +123/-33
Offline

Offline

Posts: 2179

	Re: Boost Profile « Reply #2 on: July 20, 2015, 06:43:17 AM »

He's got rods, so it's fine. Surge is true, I've got it between 3 and mid 4k. After that, it's surge free and holding 26 psi until around 5.5k.


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 16, 2024, 04:43:55 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search