injector question

Pages: [1]

« previous next »

Author

Topic: injector question (Read 5794 times)

ktm733

Hero Member

Karma: +18/-8
Offline

Offline

Posts: 660

	injector question « on: February 20, 2015, 08:35:20 AM »

Question say i have a stock everything 1.8t b6 a4 and i try to boost to say 24psi. Yes i know don't do this I'm using this as an example. Is there a load limiting based on injector on time being maxed out?


	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12268

	Re: injector question « Reply #1 on: February 20, 2015, 10:35:50 AM »

No, the car will go lean and you'll break something.


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

ktm733

Hero Member

Karma: +18/-8
Offline

Offline

Posts: 660

	Re: injector question « Reply #2 on: February 20, 2015, 02:19:30 PM »

Hm then i will my file and logs when i get home. I can't boost over 18psi. Even if i set wg duty cycle to 95 percent. Something is limiting me. Ive changed all limiting factors to. Fuel stays at .85


	Logged

_mumin_

Jr. Member

Karma: +2/-0
Offline

Offline

Posts: 46

	Re: injector question « Reply #3 on: February 21, 2015, 10:15:00 AM »

So You need to check Your hardware for leaks , wastegate opening pressure, N75 ...


	Logged

ktm733

Hero Member

Karma: +18/-8
Offline

Offline

Posts: 660

	Re: injector question « Reply #4 on: February 22, 2015, 08:22:58 PM »

Can someone check out my file and see if I'm maybe missing a load limiting factor? People are talking about kfmldmx which I haven't defined yet, in progress.


	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12268

	Re: injector question « Reply #5 on: February 22, 2015, 08:24:33 PM »

log


	Logged

turdburglar44

Full Member

Karma: +5/-1
Offline

Offline

Posts: 110

	Re: « Reply #6 on: February 23, 2015, 08:25:04 AM »

Yea you'll need to see what your wgdc is actually doing. If it is pinned at 95 then you have a mechanical issue. And regarding your question about the conversion for kfmldmx I bet it is x * .005 (different thread sorry ha)

Also, in my experience if you max out the injectors your fuel trims will briefly sky rocket. This causes the requested lambda to go below the lambda limit and causes fuel cut. (Or something like that) I remember seeing in ida a condition for injector shutdown if your requested lambda went below like 10:1 afr. Not 100% on the specifics but you'd definitely know that you maxed your injectors.


	Logged

Tuning is the easy part...

vwaudiguy

Hero Member

Karma: +53/-37
Offline

Offline

Posts: 2024

	Re: injector question « Reply #7 on: February 23, 2015, 09:45:51 AM »

Quote from: nyet on February 20, 2015, 10:35:50 AM

No, the car will go lean and you'll break something.

Wouldn't the system close the throttle body/ open the DV / do something else if it saw AFR/EGT that far out of range? I was under the impression ME7 had quite a few safety's in place. What if the line to the wg split?


	Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12268

	Re: injector question « Reply #8 on: February 23, 2015, 10:14:37 AM »

It might go limp. Maybe.


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 22, 2024, 04:18:19 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search