Pages: [1]
Author Topic: Need help getting started  (Read 3822 times)
supraman95
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1


« on: March 10, 2015, 09:52:47 AM »

I have NefMoto flasher installed.. I am trying to use a RossTech cable (I use it with VagCom).  It is a Hex+Can cable Dual K and CAN USB

I open the software and it does not show a listed connection to the car.  Do I need certain drivers or do I need a license? 

Also this is for a 2003 Allroad 2.7T.  What memory file do I select?

thanks
Logged
turboat
Moderator
Hero Member
*****

Karma: +45/-3
Offline Offline

Posts: 619


« Reply #1 on: March 10, 2015, 11:25:03 PM »

Close nef. Open vcds, go into settings. Untick 'boot in intelligent mode' (or tick 'force dumb mode') depending on which option you see. Test and save, close vcds, try again with nef. I find I have to open and close nef a few times to find my interface sometimes
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 18 queries. (Pretty URLs adds 0.001s, 0q)