ME 9.1 Immo Issues after bdm flashing

Pages: [1]

« previous next »

Author

Topic: ME 9.1 Immo Issues after bdm flashing (Read 3878 times)

R32VAG

Newbie

Karma: +0/-0
Offline

Offline

Posts: 20

	ME 9.1 Immo Issues after bdm flashing « on: July 13, 2015, 01:15:39 AM »

Hello,

read out the flash, modified it and write it back again to the ecu over obd. Checksum checked by winols and galletto during writing. I think its correct.
After reinstalling the ecu to the car there are Immobilizier active in the dash and the car starts, runs shortly an then the engine getting of again.
Failure in the ECU are only 005642 - P160A-004

Whats the problem? I have read out the immobilizer dump over bdm already
The car is an golf 5 gti.
Can anyone read out the pin code from the dump?


	Logged

aef

Hero Member

Karma: +69/-46
Offline

Offline

Posts: 1601

	Re: ME 9.1 Immo Issues after bdm flashing « Reply #1 on: July 13, 2015, 02:47:45 AM »

http://www.evc.de/en/service/q1608.asp

and there is a tag in your file.
i think you are not a member of this company Shocked


	Logged

R32VAG

Newbie

Karma: +0/-0
Offline

Offline

Posts: 20

	Re: ME 9.1 Immo Issues after bdm flashing « Reply #2 on: July 13, 2015, 02:52:27 AM »

How can i fix it??

On the ecu was an Tuning File from BTS. But we have to changed some mappings. So we write the new one but not the problem with the immo.


	Logged

de_Fre

Jr. Member

Karma: +7/-2
Offline

Offline

Posts: 25

	Re: ME 9.1 Immo Issues after bdm flashing « Reply #3 on: July 14, 2015, 07:28:06 AM »

Do a BDM read of the Flash (as it is now) and send it to someone who can and is willing to help together with the OBD read you took before you remapped it.


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 26, 2024, 03:19:33 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search