Pages: [1]
Author Topic: Fuel Trim calculation -  (Read 4652 times)
vavjettaw36
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 10


« on: October 05, 2016, 12:27:27 PM »

From this link: http://nefariousmotorsports.com/forum/index.php?topic=7596

Does anyone know the appropriate line to put in the ECU file to enable rka_w/rka2_w?   not sure what the memory address is and google brings up 3 results and they all point to the link above.

Currently on audi s4 M box
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12271


WWW
« Reply #1 on: October 05, 2016, 12:39:07 PM »

Those are both autodetected by ME7Info for Mbox.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
vavjettaw36
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 10


« Reply #2 on: October 05, 2016, 01:31:46 PM »

You are right.  The real values to use, rkat2_w and rkat_w were already in my ECU file. Or at least they came closer to the LTFT Idle values of VCDS.

I used fra_w, fra2_w for idle and rkat_w and rkat2_w and these were the values I calculated:

LTFT multi: (fra_w-1) * 100
LTFT2 multi: (fra2_w-1) * 100
LTFT idle:  rkat_w
LTFT2 idle: rkat2_w

Result:
.60 (vcds .60)
.51 (vcds .40)
5.85 (vcds 5.5)
2.53 (vcds 2.3)

Not perfect but close enough.  Probably not a significant difference.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 17 queries. (Pretty URLs adds 0s, 0q)