NefMoto > Noob Zone > Noob Questions (Moderator: turboat) > Can i use the stage 3 m-box as an EXAMPLE to build a 1.8t tune?
Pages: [1]
« previous next »
Author Topic: Can i use the stage 3 m-box as an EXAMPLE to build a 1.8t tune?  (Read 4457 times)
up50lut3
Full Member
***

Karma: +1/-0
Offline Offline

Posts: 55
« on: November 04, 2016, 07:50:49 PM »
hey all,

im just wondering if the same things that pertain to the s4 m box stage 3 tune would apply to a 1.8t stage 3 tune? as far as what maps to change and what not. im aware that a stag 3 for an s4 is very different than for a 1.8t... just wanted to know if it would be a useful avenue to explore as far as learning what and how much to tweak certain maps for a stage 3 tune... thanks !
Logged
fknbrkn
Hero Member
*****

Karma: +185/-23
Offline Offline

Posts: 1454


mk4 1.8T AUM
« Reply #1 on: November 05, 2016, 04:21:41 AM »
what you mean by st3 ?
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #2 on: November 05, 2016, 01:42:25 PM »
Yes, it is absolutely applicable.
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
up50lut3
Full Member
***

Karma: +1/-0
Offline Offline

Posts: 55
« Reply #3 on: November 08, 2016, 06:44:41 AM »
Quote from: fukenbroken on November 05, 2016, 04:21:41 AM
what you mean by st3 ?

Sorry, I guess that is quite vague. T3 50 trim, .63 hot side
440cc injectors
255 pump
Vr6 3" maf housing.
3 or 4 bar for
Maf for now

Any pointers on where to stArt? I'm going to start pouring through the s4 wiki with s4 stg3 tune as a reference point, but as far as pointers, I mean what to adjust little by litte to get going.

Like adjust maf scaling?
Requested lambda
Boost tables( requested, max req, pid's)
Timing?

I'm still learning, I only got here about 2 months ago, and while I have my k03s stage 2( typical boltons and wmi and aggressive tune) running what I think is almost perfect, there's a big difference between small changes in maps for a ko3, and the potential for error on a bt setup.

So any simple pointers on what to start with would be much appreciated. I have a hard time reading through complicated explanations of thing the first few times because I'm dyslexic, so simple explation make it easier when I re read the complicated answers.

Thanks in advanced for the help and the patience!
Logged
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2800
« Reply #4 on: November 08, 2016, 01:46:48 PM »
Quote from: up50lut3 on November 08, 2016, 06:44:41 AM
Sorry, I guess that is quite vague. T3 50 trim, .63 hot side
440cc injectors
255 pump
Vr6 3" maf housing.
3 or 4 bar for
Maf for now

Any pointers on where to stArt? I'm going to start pouring through the s4 wiki with s4 stg3 tune as a reference point, but as far as pointers, I mean what to adjust little by litte to get going.

Like adjust maf scaling?
Requested lambda
Boost tables( requested, max req, pid's)
Timing?

I'm still learning, I only got here about 2 months ago, and while I have my k03s stage 2( typical boltons and wmi and aggressive tune) running what I think is almost perfect, there's a big difference between small changes in maps for a ko3, and the potential for error on a bt setup.

So any simple pointers on what to start with would be much appreciated. I have a hard time reading through complicated explanations of thing the first few times because I'm dyslexic, so simple explation make it easier when I re read the complicated answers.

Thanks in advanced for the help and the patience!
Copy vr6 mlhfm map for maf. Look up the part number for your injectors and find the data on your injectors. Find the battery voltage injection table and input the correct data into tvub map. Calculate krkte for new injector size easy way to get you close is just a simple  cross multiplication equation current Krkte x injector size = x.    X/new injector size = new Krkte starting point. That will give you correct maf scale and injectors close enough to get it running and driving. Use long term fuel trims to dial in Krkte. That's a starting point for you.
Logged
Giving your mom a tuneup
up50lut3
Full Member
***

Karma: +1/-0
Offline Offline

Posts: 55
« Reply #5 on: November 08, 2016, 02:14:21 PM »
Thank you very much. You've no idea now much that blunt answer helps me.. I appreciate you taking the time to explain that to me.
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 24, 2024, 01:40:17 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.021 seconds with 18 queries. (Pretty URLs adds 0s, 0q)