Fans on while flashing?

Pages: [1]

« previous next »

Author

Topic: Fans on while flashing? (Read 5088 times)

seany260

Full Member

Karma: +0/-1
Offline

Offline

Posts: 119

	Fans on while flashing? « on: April 15, 2017, 12:01:51 AM »

Is it just me or does everyone else's cooling fans run full load when flashing the car? If so can anyone explain the answer to this and anyway of possible stopping it permanently.

Mines a 2002 A4 B6


	Logged

aef

Hero Member

Karma: +70/-46
Offline

Offline

Posts: 1601

	Re: Fans on while flashing? « Reply #1 on: April 15, 2017, 01:05:37 AM »

Remove fuse or connector.

Depends on Model/Engine/Flashtool

Galletto on 3L TDI or 2L TFSI does the same and there is a message which asks you to remove fuse x and y.

Always connect charger to the batterie.


	Logged

seany260

Full Member

Karma: +0/-1
Offline

Offline

Posts: 119

	Re: Fans on while flashing? « Reply #2 on: April 15, 2017, 05:34:39 AM »

Surly it's an output from the ecu when flashing that causes it to run.
Have you ever known anyone to find in the written code what forces the signal, or maybe it's a loss in voltage reference that causes this while flashing. Does the same this as if it's a bad checksum.


	Logged

jimmcgee5

Full Member

Karma: +7/-7
Offline

Offline

Posts: 201

	Re: Fans on while flashing? « Reply #3 on: April 15, 2017, 06:56:44 AM »

have never noticed this with my ebay mpps ? , probably cos i am deaf Cheesy


	Logged

gman86

Hero Member

Karma: +45/-128
Offline

Offline

Posts: 705

	Re: Fans on while flashing? « Reply #4 on: April 15, 2017, 11:34:01 AM »

It's a default setting of the fan module, not the ECU. When it loses comms with the ECU, it goes into failsafe mode and runs at 100%.


	Logged

vwaudiguy

Hero Member

Karma: +53/-37
Offline

Offline

Posts: 2024

	Re: Fans on while flashing? « Reply #5 on: April 15, 2017, 02:35:15 PM »

Quote from: gman86 on April 15, 2017, 11:34:01 AM

It's a default setting of the fan module, not the ECU. When it loses comms with the ECU, it goes into failsafe mode and runs at 100%.


	Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."

seany260

Full Member

Karma: +0/-1
Offline

Offline

Posts: 119

	Re: Fans on while flashing? « Reply #6 on: April 30, 2017, 01:50:53 PM »

Quote from: gman86 on April 15, 2017, 11:34:01 AM

It's a default setting of the fan module, not the ECU. When it loses comms with the ECU, it goes into failsafe mode and runs at 100%.

Thanks for the info, now I know for sure. Grin

Im guessing pulling a fuse or disconnecting the fan module is the only work around?


	Logged

prj

Hero Member

Karma: +1072/-482
Offline

Offline

Posts: 6038

	Re: Fans on while flashing? « Reply #7 on: April 30, 2017, 10:01:56 PM »

If the battery is decent, it can easily run the fan for 5 minutes while you are flashing.
Safer to connect a charger, but if you KNOW the battery is good, there will be no problem.


	Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 27, 2024, 01:51:13 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search