Pages: 1 [2]
Author Topic: Looking for definition file for allroad 2.7t tip 4Z7907551D  (Read 12085 times)
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #15 on: November 23, 2017, 03:21:02 PM »

Perfect,all set now to go ‘L box’. I read Ecu eeprom with Argdubs tool prior to flashing.

Now another problem arises, flash successful with rear 02 delete and sai delete  and slight tune and car starts then dies. I am presuming this is an Immobilizer issue.

I will start another topic in the appropriate section (newb questions/issues)

Any help will be appreciated greatly and thanks for all the help so far

hmm 8DO 551L does not have immo, it should not kill the motor after start.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
streacy
Full Member
***

Karma: +2/-1
Offline Offline

Posts: 105


« Reply #16 on: November 27, 2017, 03:11:03 PM »

My mistake  Roll Eyes i presumed i had a bosch maf and had a hitachi one. Loaded on appropriate file and now runs prefectly as 551L.

Can anyone confirm that the M box xdf has the same parameters as the L Box. i.e. is the attached xdf the one i should be using?
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #17 on: November 27, 2017, 06:59:10 PM »

Can anyone confirm that the M box xdf has the same parameters as the L Box. i.e. is the attached xdf the one i should be using?

Yes, 8D0..551L has the same map locations as 8D0..551M
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 18 queries. (Pretty URLs adds 0s, 0q)