Dev Blog
Forum
Wiki
About
NefMoto
>
Technical
>
Tuning
>
MED9.1 - Dsg and Launch control, after released the brakes, car don't run
Pages: [
1
]
« previous
next »
Author
Topic: MED9.1 - Dsg and Launch control, after released the brakes, car don't run (Read 4047 times)
Khendal
Full Member
Karma: +9/-8
Offline
Posts: 226
MED9.1 - Dsg and Launch control, after released the brakes, car don't run
« on: July 11, 2018, 03:22:37 AM »
Hello, does anyone of you have found this problem in a med9.1 dsg car?
For example:
- Setted launch in dsg 5500rpm
- Added LC code in ecu 5500rpm
- Car Launch work at 5500rpm
- Release the brake
- Car don't start the run...
What should be the problem? i ear something about a dsg setting... is there something else to do?
Regards
Logged
gt-innovation
Sr. Member
Karma: +60/-91
Offline
Posts: 449
Re: MED9.1 - Dsg and Launch control, after released the brakes, car don't run
« Reply #1 on: July 11, 2018, 12:46:36 PM »
First of all you have to tell us what lc code you are using and what is it doing.
Next thing is to raise the lc from the dsg higher then your code 600+ rpm.
So why do you run your lc at 5500? if your lc works good 4000 to 4500 would be perfect even for glue with any kind of turbocharger.
the reason that your car is not moving is the dsg....
Logged
Khendal
Full Member
Karma: +9/-8
Offline
Posts: 226
Re: MED9.1 - Dsg and Launch control, after released the brakes, car don't run
« Reply #2 on: July 11, 2018, 02:26:26 PM »
Quote from: gt-innovation on July 11, 2018, 12:46:36 PM
...
the reason that your car is not moving is the dsg....
Thanks as always, what i though!
... now I have to find out why and which map does not let the car move
See you next year
Logged
gt-innovation
Sr. Member
Karma: +60/-91
Offline
Posts: 449
Re: MED9.1 - Dsg and Launch control, after released the brakes, car don't run
« Reply #3 on: July 11, 2018, 02:43:57 PM »
lower your lc from ecu and car will start....the algo you mentioned is just for show off...
Logged
teobolo
Full Member
Karma: +24/-6
Offline
Posts: 112
Re: MED9.1 - Dsg and Launch control, after released the brakes, car don't run
« Reply #4 on: July 12, 2018, 11:28:24 PM »
i usually use 300-400rpm lower for LC in engine ecu than the tcu and the car starts perfect ...But it needs some testing....
Logged
Pages: [
1
]
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> Introductions
=> General Discussion
-----------------------------
Noob Zone
-----------------------------
=> Noob Questions
=> Noob Guides and FAQs
-----------------------------
Technical
-----------------------------
=> NefMoto Software
=> Tuning
===> Documents & Helpers & How To's
===> Community Projects
=> Diagnostics
=> Flashing and Chipping
=> Cluster and Immobilizer
===> ECU EEPROM images
===> Original Cluster dumps
===> Original Cluster dump requests
=> Data Logging
=> Reverse Engineering
=> Communication Protocols
-----------------------------
ECU Files
-----------------------------
=> ECU Definition Files
===> ECU Definition File Requests
=> Original ECU Files
===> Original ECU File Requests
=> Checksum Update Requests
-----------------------------
Vehicles
-----------------------------
=> Vehicle Tech
=> Project Cars
-----------------------------
Regional
-----------------------------
=> Canadian Regional Discussion
=> US Regional Discussion
-----------------------------
Classifieds
-----------------------------
=> For Sale
=> Wanted
=> Services
-----------------------------
Miscellaneous
-----------------------------
=> Off Topic
=> Forum Tech Support
=> Bizarro Messages Posted by Bots and Spammers
Navigation
Home
Help
Login
Register
Personal Tools
September 23, 2024, 05:17:02 AM
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Search
Advanced Search
Loading...