Pages: [1]
Author Topic: me7sum  (Read 5465 times)
nickw
Jr. Member
**

Karma: +0/-3
Offline Offline

Posts: 48


« on: April 12, 2019, 02:59:38 PM »

can someone help me out? when I download the me7sum zip its just a file and doesn't come up as and application, I try to run CMD anyways and I keep getting the error messages. system cannot find the path specified. TIA
Logged
m_haiser
Full Member
***

Karma: +0/-2
Offline Offline

Posts: 68


« Reply #1 on: April 12, 2019, 03:02:54 PM »

me7sum isn't an application per se.
in cmd you type me7sum space (name of bin file) another space (name of bin file after corrections)
it will then correct checksums and save the (name of bin file after corrections) and you can delete the first file
Logged
nickw
Jr. Member
**

Karma: +0/-3
Offline Offline

Posts: 48


« Reply #2 on: April 12, 2019, 03:05:30 PM »

now I get this... ive been messing with this for hours....

me7sum 2000 audi s4 stock file#2.bin 2000 audi s4 stock file#2_fixed.bin
'me7sum' is not recognized as an internal or external command,
operable program or batch file.
Logged
nickw
Jr. Member
**

Karma: +0/-3
Offline Offline

Posts: 48


« Reply #3 on: April 12, 2019, 03:49:51 PM »

*update* I now get this...   C:\>me7sum\me7sum 2000 audi s4 stock file#2.bin 2000 audi s4 stock file#2_fixed.bin
ME7Tool (v1.0.3) [Management tool for Bosch ME7.x firmwares]
Inspiration from Andy Whittaker's tools and information.
Written by 360trev and nyet [BSD License Open Source].
Usage: me7sum\me7sum [-v] [-i <config.ini>] <inrom.bin> [outrom.bin]
       me7sum\me7sum [-v] [-i <config.ini>] -s <inrom.bin>
Logged
nickw
Jr. Member
**

Karma: +0/-3
Offline Offline

Posts: 48


« Reply #4 on: April 12, 2019, 04:06:33 PM »

I finally got me7sum to work on my computer and it fixed the checksums, it says it saved it to the file name I specified, but I cant find where it saved the file? Thanks in advance
Logged
nickw
Jr. Member
**

Karma: +0/-3
Offline Offline

Posts: 48


« Reply #5 on: April 12, 2019, 04:18:42 PM »

C:\>me7sum\me7sum me7sum\2.7t.bin 2.7t.bin
ME7Tool (v1.0.3) [Management tool for Bosch ME7.x firmwares]
Inspiration from Andy Whittaker's tools and information.
Written by 360trev and nyet [BSD License Open Source].

Attempting to open firmware file 'me7sum\2.7t.bin'

Step #1: Reading ROM info ..
 Searching for EPK signature...OK
 Searching for ECUID table...OK
 EPK         : '42/1/ME7.1/5/6005.01//X22ka/Dstc3g/300899/'
 Part Number : '8D0907551A  '
 Engine ID   : '2.7l V6/5VT     '
 SW Version  : '0003'
 HW Number   : '0261206110'
 SW Number   : '1037352741'

Step #2: Reading ROMSYS ..
 Startup section: word[0x008000]+word[0x00FFFE]
 @008038 Add=0x00C483 CalcAdd=0x00C483  ADD OK
 Program pages: 8k page first+last in 0x0000-0xFFFF and 0x20000-0xFFFFF
 @00803c Add=0xB5EF33 CalcAdd=0xB5EF33  ADD OK
 All param page: word[0x010000]+word[0x01FFFE]
 @01b710 Add=0x00971D CalcAdd=0x00971D  ADD OK

Step #3: Reading RSA signatures ..
 Searching for RSA offset #0...missing
 Searching for RSA offset #1...missing

Step #4: Finding CRC table(s) ..
 Searching for CRC table(s)...OK
 CRC table(s) OK

Step #5: Reading Main Data Checksums ..
 Searching for main data CRC pre block...missing
 Searching for main data CRC/csum blocks...OK
 Searching for main data CRC offsets...OK
 Searching for main data checksum offsets...missing
 Main CRCs:
 1) 0x010002-0x013FFE @73ae6 CRC: A8B8C51A CalcCRC: 50D9E45B    ** FIXED **
 2) 0x014252-0x017F4E @73aec CRC: ED3733BA CalcCRC: A6863C37    ** FIXED **
 3) 0x018192-0x01FBB0 @73af2 CRC: C987ED74 CalcCRC: C987ED74    CRC OK

Step #6: Reading Main Program Checksums ..
 Searching for main program checksum..OK
 ROM Checksum Block Offset Table @1e3d4 [16 bytes]:
 1) 0x000000-0x00FBFF CalcChk: 496A3AD7
    0x00FC00-0x01FFFF CalcChk: 2C029E32 CalcCRC: A9EE4B03 SKIPPED
 2) 0x020000-0x0FFFFF
    <fffe0>  Chk: C0143D98 CalcChk: C013C6C6 ** FIXED **

Step #7: Reading Multipoint Checksum Blocks ..
 Searching for multipoint block descriptor #1...OK
 1) <14224>  0x024000-0x02658D Chk: 0B05583C CalcChk: 0B05583C OK
 2) <14234>  0x014000-0x014243 Chk: 00586E68 CalcChk: 00586E68 OK (i)
 3) <14244>  0xFFFFFFFF-0xFFFFFFFF  END
 Multipoint #1: [2 blocks x <16> = 32 bytes]
 Searching for multipoint block descriptor #2...OK
 1) <1fbb2>  0x000000-0x003FFF Chk: 0FA0F5CF Boot: (whitelisted) OK
 2) <1fbc2>  0x004000-0x007FFF Chk: 0F4716B3 Boot: (whitelisted) OK
 3) <1fbd2>  0x000000-0x003FFF Chk: 0FE3972C CalcChk: 0FE3972C OK
 4) <1fbe2>  0x004000-0x007FFF Chk: 107D0E26 CalcChk: 107D0E26 OK
 Multipoint #2: [66 blocks x <16> = 1056 bytes]

*** Found 73 checksums in me7sum\2.7t.bin

Attempting to output corrected firmware file '2.7t.bin'
├╛ Opening '2.7t.bin' file for writing
├╛ Writing to file
├╛ Validating size correct 1048576=1048576
├╛ All OK, closing file

*** DONE! 6/6 error(s) in me7sum\2.7t.bin corrected in 2.7t.bin! ***

C:\>
Logged
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1282



« Reply #6 on: April 12, 2019, 04:20:47 PM »

Where you specified it or where your exe is ?
Logged
nickw
Jr. Member
**

Karma: +0/-3
Offline Offline

Posts: 48


« Reply #7 on: April 12, 2019, 05:56:09 PM »

I cant find it anywere
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #8 on: April 12, 2019, 06:18:31 PM »

*update* I now get this...   C:\>me7sum\me7sum 2000 audi s4 stock file#2.bin 2000 audi s4 stock file#2_fixed.bin
ME7Tool (v1.0.3) [Management tool for Bosch ME7.x firmwares]
Inspiration from Andy Whittaker's tools and information.
Written by 360trev and nyet [BSD License Open Source].
Usage: me7sum\me7sum [-v] [-i <config.ini>] <inrom.bin> [outrom.bin]
       me7sum\me7sum [-v] [-i <config.ini>] -s <inrom.bin>

How does it know where the file names start and end if you have *spaces* in your damn file names?
Code:
C:\>me7sum\me7sum "2000 audi s4 stock file#2.bin" "2000 audi s4 stock file#2_fixed.bin"
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
nickw
Jr. Member
**

Karma: +0/-3
Offline Offline

Posts: 48


« Reply #9 on: April 12, 2019, 09:09:35 PM »

that's probably why then, I kept messing with it and got it to work
Logged
Maxohio
Full Member
***

Karma: +3/-3
Offline Offline

Posts: 83


« Reply #10 on: April 12, 2019, 10:52:25 PM »

Hi, send me a pm, i can assist you with Teamviewer
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #11 on: April 12, 2019, 10:58:34 PM »

open a cmd window and type "explorer c:\me7sum"
« Last Edit: April 13, 2019, 12:13:27 AM by nyet » Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Maxohio
Full Member
***

Karma: +3/-3
Offline Offline

Posts: 83


« Reply #12 on: April 12, 2019, 11:07:56 PM »

Woooaa calm down ya tits  Wink Kiss
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #13 on: April 12, 2019, 11:09:38 PM »

Woooaa calm down ya tits  Wink Kiss

It's incredible to me that people don't even bother doing any research on their own.

http://nefariousmotorsports.com/forum/index.php?topic=11034.0title=
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
BlackT
Hero Member
*****

Karma: +79/-40
Offline Offline

Posts: 1425



« Reply #14 on: April 13, 2019, 12:03:05 AM »

Woooaa calm down ya tits  Wink Kiss
If you asking me, this tread schould be erased. If he can't find by his own how to use CMD(what is explained on this forum tooooo many times) then for he is better to give up from tuning.
I didn't know eather how to use CMD and me7sum when I get to this forum. But I spent some time searching on this forum and try,try and try till I get it done
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.029 seconds with 18 queries. (Pretty URLs adds 0s, 0q)