Pages: 1 2 [3]
Author Topic: 5120 hack clarifications  (Read 11509 times)
Imho
Jr. Member
**

Karma: +0/-2
Offline Offline

Posts: 29


« Reply #30 on: August 23, 2024, 01:26:03 PM »

Hi,
I recently moved from 3bar map to 4bar sensor (281.006.059).
calculated values for DSLOFS=31.7 and DSLGRAD=437
with those car drives ok, afr is fine and  actual pressure seems to match my boost guage but the desired pressues  (plsol) is 700mbar at idle and much lower than my actual request in log.
having 400mbar+ difference for actual vs desired does not trigger throttle cut so its only logging issue... ?
 
Logged
prj
Hero Member
*****

Karma: +1069/-476
Offline Offline

Posts: 6011


« Reply #31 on: August 24, 2024, 01:52:05 AM »

plsol is irrelevant on idle.
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
Imho
Jr. Member
**

Karma: +0/-2
Offline Offline

Posts: 29


« Reply #32 on: August 25, 2024, 02:37:51 AM »

plsol is irrelevant on idle.

ok but desired pressure is also wrong with WOT - again no throttle cut even with 400mbar difference - should i log something else than plsol ?

Edit
need to fix my statement actualpressure is wrong as well Wink
« Last Edit: August 27, 2024, 09:33:12 AM by Imho » Logged
Pages: 1 2 [3]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.028 seconds with 18 queries. (Pretty URLs adds 0s, 0q)