How to set the KSTT map for LPG

Pages: [1]

« previous next »

Author

Topic: How to set the KSTT map for LPG (Read 885 times)

Kacpern

Jr. Member

Karma: +0/-5
Offline

Offline

Posts: 35

	How to set the KSTT map for LPG « on: October 21, 2024, 05:43:10 AM »

Hello everyone, I'm looking for guides and advice on how to decorate the KSTT map.
Problem
At a temperature of 0 to 20 degrees, the starter turns for 2-3 seconds before it starts, then it starts and runs well (holds idle speed), has the power to drive.
The starting dose is significantly reduced compared to gasoline.
0-5 degrees 6.5ms
10-15 degrees 5ms
20 degrees 4 ms

These are the best results. I tried changing them up and down by 0.1 ms many times, but it didn't help.


	Logged

Kacpern

Jr. Member

Karma: +0/-5
Offline

Offline

Posts: 35

	Re: How to set the KSTT map for LPG « Reply #1 on: October 24, 2024, 08:22:03 AM »

Or in other words, how to measure whether there is too little or too much fuel when the lambda probe does not work because it is cold?

LOG
AND
MAP
0 -33°C
1 -18°C
2 -9°C
3 -1°C
4 15°C
5 21°C
6 32°C
7 57°C
8 69°C
9 73°C
10 98°C
11 132°C


« Last Edit: October 24, 2024, 10:46:17 AM by Kacpern »	Logged

Kacpern

Jr. Member

Karma: +0/-5
Offline

Offline

Posts: 35

	Re: How to set the KSTT map for LPG « Reply #2 on: October 26, 2024, 12:27:56 PM »

Nobody knows anything?


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 13, 2024, 11:50:57 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search