Galletto issue

Pages: 1 [2]

« previous next »

Author

Topic: Galletto issue (Read 14202 times)

Bi-turbo

Full Member

Karma: +1/-7
Offline

Offline

Posts: 164

	Re: Galletto issue « Reply #15 on: August 19, 2014, 02:12:34 AM »

Nice one thank you.

Does the chip just sit in the adaptor?


	Logged

ddillenger

Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: Galletto issue « Reply #16 on: August 19, 2014, 02:17:55 AM »

It clips in.

When you get the adapter you'll see! Google it!


	Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM

Bi-turbo

Full Member

Karma: +1/-7
Offline

Offline

Posts: 164

	Re: Galletto issue « Reply #17 on: August 19, 2014, 02:19:12 AM »

Could that be why galletto wont write to it then as the eprom is blank?


	Logged

Bi-turbo

Full Member

Karma: +1/-7
Offline

Offline

Posts: 164

	Re: Galletto issue « Reply #18 on: August 19, 2014, 02:20:23 AM »

Quote from: ddillenger on August 19, 2014, 02:17:55 AM

It clips in.

When you get the adapter you'll see! Google it!

Thought so was just checking, PSOP44 adapter £10 just need to chose a programmer


	Logged

ddillenger

Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: Galletto issue « Reply #19 on: August 19, 2014, 02:41:37 AM »

Galletto will write a blank chip, no problem. I solder them on blank and then bootflash all the time. Programming it BEFORE soldering will allow you to rule that out.


	Logged

TCSTigersClaw

Sr. Member

Karma: +15/-6
Offline

Offline

Posts: 353

	Re: Galletto issue « Reply #20 on: August 19, 2014, 02:46:35 AM »

Yes with Boot you can write blanked chips. I think he wants to write it in normal mode ,that is not possible

I also use GQ4X . One piece of advice though ,always CHECK ID (you will see it in the software) the Chip sometimes they show something else .Remove it from PSOP adapter ,put it again and recheck before writing


	Logged

VAG cars newbie tuner

Bi-turbo

Full Member

Karma: +1/-7
Offline

Offline

Posts: 164

	Re: Galletto issue « Reply #21 on: August 19, 2014, 02:48:37 AM »

Hmmm i dont want to be spending out on kit i dont need, if you have put them on blank and galletto with ecu in boot will flash a file on then that puts me back to the ecu having a fault??

Galletto says start writing...

Then 10-15 sec later changes to Start writing...writing error

The chip is solder on correctly and has continuity everywere from the eprom pins to all corrisponding pins/points on the ecu

What else could cause this?


	Logged

Bi-turbo

Full Member

Karma: +1/-7
Offline

Offline

Posts: 164

	Re: Galletto issue « Reply #22 on: August 19, 2014, 02:50:07 AM »

Quote from: TCSTigersClaw on August 19, 2014, 02:46:35 AM

Yes with Boot you can write blanked chips. I think he wants to write it in normal mode ,that is not possible

How do you mean "normal mode"?

Thanks


	Logged

ddillenger

Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: Galletto issue « Reply #23 on: August 19, 2014, 03:20:07 AM »

Quote from: Bi-turbo on August 19, 2014, 02:50:07 AM

How do you mean "normal mode"?

Thanks

Normal=any mode that isn't bootmode. You must bootmode a blank eprom before you can flash using the OBD protocol.


	Logged

Bi-turbo

Full Member

Karma: +1/-7
Offline

Offline

Posts: 164

	Re: Galletto issue « Reply #24 on: August 19, 2014, 03:25:01 AM »

The ecu is in bootmode when trying to flash a file

Ground pin 24 on the eprom beofre turning on the power


	Logged

Pages: 1 [2]

« previous next »

Jump to:

Navigation

Personal Tools

November 28, 2024, 03:57:45 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search