Pages: [1]
Author Topic: A8 4D TesterPresent not received, RequestUpload not supported  (Read 8617 times)
SundayNightDriver
Jr. Member
**

Karma: +9/-1
Offline Offline

Posts: 25


« on: December 06, 2010, 10:11:43 AM »

My ECU 4D0907558G (1999 A8 4D 3.7) replies with "ServiceNotSupported" to RequestUpload. Also, the TesterPresent response does not get received by the program.
Afterwards, a "terminal 30 voltage too low" error is recorded, but this seems to be a side effect as I have tried with a charger attached.

05/Dec/2010 02:03:10.272: USER: Clearing ECU diagnostic information succeeded.                                             
05/Dec/2010 02:03:12.771: LOG: Sent message with service ID TesterPresent                                                 
05/Dec/2010 02:03:12.784: LOG: Received message with service ID TesterPresentPositiveReponse                               
05/Dec/2010 02:03:15.293: LOG: Sent message with service ID TesterPresent                                                 
05/Dec/2010 02:03:15.309: LOG: Received message with service ID TesterPresentPositiveReponse                               
05/Dec/2010 02:03:17.818: LOG: Sent message with service ID TesterPresent                                                 
05/Dec/2010 02:03:17.832: LOG: Received message with service ID TesterPresentPositiveReponse                               
05/Dec/2010 02:03:20.340: LOG: Sent message with service ID TesterPresent                                                 
05/Dec/2010 02:03:20.356: LOG: Received message with service ID TesterPresentPositiveReponse                               
05/Dec/2010 02:03:22.672: LOG: Clearing 1 bytes from receive buffer because P2 max response message timeout has expired.   
Logged
Tony@NefMoto
Administrator
Hero Member
*****

Karma: +132/-4
Offline Offline

Posts: 1389


2001.5 Audi S4 Stage 3


« Reply #1 on: December 07, 2010, 10:44:53 PM »

What is the make, model and year of the car?

Cars before 2000 don't all support reading and writing the flash memory.

RequestUpload service not supported can also mean that a tuner has disabled reading the ECU flash memory.

The TesterPresent error you got should be fixed in the next software release.

Logged

Remember you have to log in if you want to see the file attachments!
Info or questions, please add to the wiki: http://www.nefariousmotorsports.com/wiki
Follow NefMoto developments on Twitter: http://twitter.com/nefmoto
SundayNightDriver
Jr. Member
**

Karma: +9/-1
Offline Offline

Posts: 25


« Reply #2 on: December 08, 2010, 09:31:57 AM »

Audi A8 3.7 from 1999 ("Facelift", 2000 model year).
The ECU is stock, it hasn't been tuned.

Will try the next release once it's out. Keep up the good work. Wink

Logged
Rick
Hero Member
*****

Karma: +63/-4
Offline Offline

Posts: 704


« Reply #3 on: December 08, 2010, 10:29:02 AM »

It looks like your car doesn't support KWP2000.  My S4 is a 99 and doesn't either, so I had to swap the ECU from a slightly later model.

Rick
Logged
SundayNightDriver
Jr. Member
**

Karma: +9/-1
Offline Offline

Posts: 25


« Reply #4 on: December 08, 2010, 10:39:05 AM »

Facelift A8s support KWP2000, Lemmiwinks and Unisettings use it to change adaptation channel values.
Logged
Tony@NefMoto
Administrator
Hero Member
*****

Karma: +132/-4
Offline Offline

Posts: 1389


2001.5 Audi S4 Stage 3


« Reply #5 on: December 08, 2010, 12:39:55 PM »

It's possible that your car supports the KWP2000 protocol, but that it does not support flashing over KWP2000.
Logged

Remember you have to log in if you want to see the file attachments!
Info or questions, please add to the wiki: http://www.nefariousmotorsports.com/wiki
Follow NefMoto developments on Twitter: http://twitter.com/nefmoto
Rick
Hero Member
*****

Karma: +63/-4
Offline Offline

Posts: 704


« Reply #6 on: December 09, 2010, 07:20:35 AM »

Also,

try it on the bench out of car.  I have to flash mine out of car, something else on the K line mustn't like it.

Rick
Logged
SundayNightDriver
Jr. Member
**

Karma: +9/-1
Offline Offline

Posts: 25


« Reply #7 on: December 09, 2010, 12:44:25 PM »

Could be. I don't have a power supply for this though.
Also, so far I didn't succeed in finding the immo functions in the firmware anyway, and there is little tuning possible for a naturally aspirated petrol engine. Plus I wouldn't know what to change, there are no tuned maps for these engines anywhere.

Logged
Tony@NefMoto
Administrator
Hero Member
*****

Karma: +132/-4
Offline Offline

Posts: 1389


2001.5 Audi S4 Stage 3


« Reply #8 on: December 09, 2010, 12:57:58 PM »

Turbo R32 FTW.  Grin

Then you would have a reason to tune the maps.
Logged

Remember you have to log in if you want to see the file attachments!
Info or questions, please add to the wiki: http://www.nefariousmotorsports.com/wiki
Follow NefMoto developments on Twitter: http://twitter.com/nefmoto
SundayNightDriver
Jr. Member
**

Karma: +9/-1
Offline Offline

Posts: 25


« Reply #9 on: December 09, 2010, 01:24:51 PM »

There is no space for a turbo in the A8... Audi's turbo V8s are dry sump versions.
One guy from the owner's club here put years of work into a turbo conversion, and it barely works..engine is more outside the car than inside. Also, you need one of the rare S8s with a manual transmission for this, as the charged engine would tear the automatic transmission apart.

There are NOS S8s with about 550 HP though.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 18 queries. (Pretty URLs adds 0.001s, 0q)