Dev Blog
Forum
Wiki
About
NefMoto
>
Technical
>
NefMoto Software
>
I cant read my ECU!?
Pages: [
1
]
« previous
next »
Author
Topic: I cant read my ECU!? (Read 8646 times)
stahlg
Newbie
Karma: +0/-0
Offline
Posts: 7
I cant read my ECU!?
« on: February 02, 2014, 03:52:36 AM »
Hey Friends!
I have a connection with NefMoto and read ECU info no problem. Using a original HEX-USB Interface with bench harness cable.
I cant read the flash from the ECU. Every time the Message "Reading ECU flash memory failed" is comming. I dont know why?
Using several baudrates without any result. ECU is from a S3 1.8T BAM Engine. (ML906032A 1.8l R4/5VT 0002)
The Memorylayout i have used is the: 29F800BB that must be right!?
ich weiß nicht weiter. please help.
Logged
stahlg
Newbie
Karma: +0/-0
Offline
Posts: 7
Re: I cant read my ECU!?
« Reply #1 on: February 02, 2014, 03:53:09 AM »
Disabling Windows sleep mode.
Reading ECU flash memory.
ECU reports programming session preconditions have been met.
Negotiating communication timings.
Successfully changed to new communication timings.
Requesting security access.
ECU reports that security access request was rejected.
Starting diagnostic session.
Disconnecting because no response was received for the Tester Present message.
Disconnected
Reading ECU flash memory failed.
100% complete.
Restoring Windows sleep mode.
Logged
_nameless
Hero Member
Karma: +342/-466
Offline
Posts: 2800
Re: I cant read my ECU!?
« Reply #2 on: February 02, 2014, 03:48:12 PM »
Quote from: stahlg on February 02, 2014, 03:53:09 AM
Disabling Windows sleep mode.
Reading ECU flash memory.
ECU reports programming session preconditions have been met.
Negotiating communication timings.
Successfully changed to new communication timings.
Requesting security access.
ECU reports that security access request was rejected.
Starting diagnostic session.
Disconnecting because no response was received for the Tester Present message.
Disconnected
Reading ECU flash memory failed.
100% complete.
Restoring Windows sleep mode.
do your self a favor and buy this. no memory selection or connection speed. also has boot mode recovery. For the price you cat get any better
http://www.ebay.com/itm/SMPS-MPPS-K-CAN-V13-Chip-Tuning-Power-Auto-ECU-Tuning-Car-Remap-OBD2-OBD-Cable-1-/181289298628?pt=Motors_Automotive_Tools&hash=item2a35af2ac4&vxp=mtr
Logged
Giving your mom a tuneup
stahlg
Newbie
Karma: +0/-0
Offline
Posts: 7
Re: I cant read my ECU!?
« Reply #3 on: February 04, 2014, 09:30:59 AM »
i have a MPPS V12 cable. that works perfect. but not in combination with NefMoto??
Thats not the Question man;) I need help about the Problem with ECU reading Problems in Nefmoto
Logged
jogtx16v
Full Member
Karma: +6/-1
Offline
Posts: 139
Re: I cant read my ECU!?
« Reply #4 on: February 04, 2014, 09:58:25 AM »
I also tried to read/flash with nefmoto on the bench, with kpw2000 protocol and I have the same problem ''ECU reports that security access request was rejected. '' and ''Reading ECU flash memory failed'' on 032DL 1.8t ecu
I think nefmoto are better for read/flash ecu in car. not sure about this thing. if anybody can confirm ?
In the bench I read/flash with galletto in boot mode with blue KKL ftdi cable.
I have adapted the serial # of the FTDI chip to work with galletto software.
sorry for my english
«
Last Edit: February 04, 2014, 10:02:07 AM by jogtx16v
»
Logged
_nameless
Hero Member
Karma: +342/-466
Offline
Posts: 2800
Re: I cant read my ECU!?
« Reply #5 on: February 06, 2014, 08:44:21 PM »
why do you need nefmoto for a read when you have other software that will work just fine?
Logged
Giving your mom a tuneup
stahlg
Newbie
Karma: +0/-0
Offline
Posts: 7
Re: I cant read my ECU!?
« Reply #6 on: February 10, 2014, 11:52:04 AM »
because that nefmoto forum is here
and I want to know why nefmoto not WORK?
Logged
ddillenger
Hero Member
Karma: +641/-21
Offline
Posts: 5640
Re: I cant read my ECU!?
« Reply #7 on: February 10, 2014, 11:57:32 AM »
Just like the narrowband TT's, nefmoto rarely works. Tony's not around much for support either I'm afraid.
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!
Email/Google chat:
DDillenger84(at)gmail(dot)com
Email>PM
Pages: [
1
]
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> Introductions
=> General Discussion
-----------------------------
Noob Zone
-----------------------------
=> Noob Questions
=> Noob Guides and FAQs
-----------------------------
Technical
-----------------------------
=> NefMoto Software
=> Tuning
===> Documents & Helpers & How To's
===> Community Projects
=> Diagnostics
=> Flashing and Chipping
=> Cluster and Immobilizer
===> ECU EEPROM images
===> Original Cluster dumps
===> Original Cluster dump requests
=> Data Logging
=> Reverse Engineering
=> Communication Protocols
-----------------------------
ECU Files
-----------------------------
=> ECU Definition Files
===> ECU Definition File Requests
=> Original ECU Files
===> Original ECU File Requests
=> Checksum Update Requests
-----------------------------
Vehicles
-----------------------------
=> Vehicle Tech
=> Project Cars
-----------------------------
Regional
-----------------------------
=> Canadian Regional Discussion
=> US Regional Discussion
-----------------------------
Classifieds
-----------------------------
=> For Sale
=> Wanted
=> Services
-----------------------------
Miscellaneous
-----------------------------
=> Off Topic
=> Forum Tech Support
=> Bizarro Messages Posted by Bots and Spammers
Navigation
Home
Help
Login
Register
Personal Tools
November 22, 2024, 10:15:13 PM
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Search
Advanced Search
Loading...
