For the sake of help and to understand what exactly I am looking for in these logs I am posting to see if anyone can lead me in the right direction of solving this problem.

First the problem. The car seems to be loosing boost some place but we can't find it. New o-rings in the DV, new N75, New wastegate, New Turbo, new exhaust mani and gaskets. All the clamps and hoses seem to be tight. All silicon hoses. This happened before the new turbo and such which is partially why they were replaced however it was going to be done either way.
The turbo is a K04 with internal wastegate. new Maf from tt 225, new injectors from tt. The car did this on the giac file for the k03 and now it has a flash for the k04 with all the other mods but same problem. The car keeps throwing a code for running rich which if it is loosing boost I would expect that to be the reason. I have logs from VCDS at cruise and some of under load. If someone could take a look and maybe point me to the things I need to check, I would appreciate it and maybe even tell me what in the logs pushed you that way. Thanks.

I checked all your logs but they are pretty useless as the log rate is worse than 1 Hz.

please redo a full pull in full range of rev and highest gear possible and log only N75 duty cycle, boost spec and actual.


first guess:
Seems your wastegate actuator (spring) is to weak to close the WG. Seeing it maxing out at 93.7 duty at higher revs.

did you check the pressure when it opens and is fully opened?

Do a pressure test of the intake system to check for boost leaks. Then also check that your wastegate actuator lines for leaks. If you connect a hand pump like a MityVac to your wastegate lines, then the wastegates should begin to crack open at 7 psi if I recall correctly.