Pages: [1]
Author Topic: Idle Hunting/Jumping. What could be the reason of that behavior???  (Read 5592 times)
eliotroyano
Hero Member
*****

Karma: +47/-8
Offline Offline

Posts: 807



Hi friends. I have a doubt about a weird behavior at idle. Please check logs around 1min and 16min time period. Basically I notice that idle jumps really hard, like hunting for idle. To add info to the post, engine is 1.8T AGU DBC with 06A906018CG M383 ECU.
Basically this situation occurs from cold startup to warm. Also with AA on is worst. The engine is hot, sometimes do it but is practically not detectable.

Here I left you some pics and log of my issue. Some advice will be really nice. Take a look at logs aroun minute 1 and around minute 16.





Logged
Westfarmracing
Full Member
***

Karma: +3/-0
Offline Offline

Posts: 110


« Reply #1 on: December 21, 2014, 02:41:03 PM »

Vac leak?
Logged
eliotroyano
Hero Member
*****

Karma: +47/-8
Offline Offline

Posts: 807


« Reply #2 on: December 21, 2014, 09:06:53 PM »

Vac leak?

I have check for it, but it don't have any vacuum or boost leaks at all.
Logged
Westfarmracing
Full Member
***

Karma: +3/-0
Offline Offline

Posts: 110


« Reply #3 on: December 22, 2014, 01:15:05 PM »

I have check for it, but it don't have any vacuum or boost leaks at all.

You have a vacuum-booster under your intake? And maybe a check-valve in there that could be haunting you.
Or maybe just trouble with your TB?
Logged
eliotroyano
Hero Member
*****

Karma: +47/-8
Offline Offline

Posts: 807


« Reply #4 on: December 23, 2014, 05:41:48 AM »

You have a vacuum-booster under your intake? And maybe a check-valve in there that could be haunting you.
Or maybe just trouble with your TB?

Thanks for the advice but everything starts since I start tweaking ECU in car, inclusive one car is warm and get hot it barelly occurs. About other comments, TB is same of all time and I pretty sure that is totally OK. I have checked and seems to work properly. About check valves, I don't have PCV system, no SAI and check valves for brakes and gas tank ventilation are new.
Logged
Westfarmracing
Full Member
***

Karma: +3/-0
Offline Offline

Posts: 110


« Reply #5 on: December 23, 2014, 10:23:27 AM »

Thanks for the advice but everything starts since I start tweaking ECU in car, inclusive one car is warm and get hot it barelly occurs. About other comments, TB is same of all time and I pretty sure that is totally OK. I have checked and seems to work properly. About check valves, I don't have PCV system, no SAI and check valves for brakes and gas tank ventilation are new.

If it started after you tinkered with it, then i guess you should post your file, ori and mod.
Logged
julex
Hero Member
*****

Karma: +78/-4
Offline Offline

Posts: 923


« Reply #6 on: December 23, 2014, 11:15:47 AM »

It is always wrong TVUB, provided hardware is ok. Log misfires too and you will see it misfiring.

What injectors are you running?
Logged
eliotroyano
Hero Member
*****

Karma: +47/-8
Offline Offline

Posts: 807


« Reply #7 on: December 23, 2014, 07:47:26 PM »

It is always wrong TVUB, provided hardware is ok. Log misfires too and you will see it misfiring.
What injectors are you running?

I have been running Genesis I 415cc injectors with my OEM 1.8T AGU TVUB values:
V 7,960   10,000   11,970   14,010   15,980
  1,707   1,141           0,661           0,491            0,341
« Last Edit: December 23, 2014, 07:51:35 PM by eliotroyano » Logged
eliotroyano
Hero Member
*****

Karma: +47/-8
Offline Offline

Posts: 807


« Reply #8 on: December 23, 2014, 07:50:54 PM »

It is always wrong TVUB, provided hardware is ok. Log misfires too and you will see it misfiring.
What injectors are you running?

I also scaled TEMIN from 1.1997 to 0.7505 for new 415cc injectors. I notice that basically problem occurs at low injector´s period values.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.024 seconds with 17 queries. (Pretty URLs adds 0s, 0q)