NefMoto > Technical > Tuning > Looking at two different tunes, timing table, y axis numbers complete different?
Pages: [1]
« previous next »
Author Topic: Looking at two different tunes, timing table, y axis numbers complete different?  (Read 6534 times)
AustinLee
Jr. Member
**

Karma: +1/-0
Offline Offline

Posts: 37
My 01 S4 that i have came with a GIAC stage 1 tune, or so i was told. I read the ECU and looked at a few of the tables to understand what GIAC actually changes. The confusion arose when i looked at the timing table and the y axis numbers were completely different from a "stock" bin i found on nefmoto? Not even comparable. See pictures below. From my very limited understanding the variable KFZWOP is load vrs timing? How can the load be maxed at 191 for my GIAC tune but be at 1325 on somebody elses "Stock" tune?

GIAC



Other Stock Tune


Comparing them yields proper numbers?



Lastly is there a button to sort everything like in the GIAC tune?

Thanks for all the help guys!!
Logged
yxx499
Full Member
***

Karma: +4/-10
Offline Offline

Posts: 106
I think is stg1 file.

Your map factors offset and values are not good.

Giac tune is KFZW map.

Your map is not KFZW or have wrong def. file.
Logged
AustinLee
Jr. Member
**

Karma: +1/-0
Offline Offline

Posts: 37
Quote from: telnet402m on August 24, 2016, 07:05:42 AM
I think is stg1 file.

Your map factors offset and values are not good.

Giac tune is KFZW map.

Your map is not KFZW or have wrong def. file.

Sorry to clarify, you think i have an issue with the stg1 file(My GIAC tuned ECU)? You are questioning wether or not I have the correct definition file?
I am attempting to upload the files i am using.. not sure how to attach.

My 2001 S4 ECU 8D0907551 T
Comparison File 4B0907551T
xdf file  8D0907551M-20130729

Maybe my comparison file is not a good one to compare to?

Thanks,
Austin
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12270


WWW
GIAC files have fake map changes. Don't bother comparing.
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
AustinLee
Jr. Member
**

Karma: +1/-0
Offline Offline

Posts: 37
Quote from: nyet on August 24, 2016, 07:43:02 AM
GIAC files have fake map changes. Don't bother comparing.

hmmm interesting. Ok, that being said, would you recommend i flash someone else's T-Box stock tune, or a AA-box stock tune onto my car and go from there?
Logged
corradovolksb
Full Member
***

Karma: +18/-1
Offline Offline

Posts: 112
Giac changes map locations around to hide what maps they change and the values changed in the maps. Without a good definition file from giac for that specific file you won't be able to locate the changes very easily.  The mbox xdf won't line up with all of the maps from your Tbox either.
Logged
2000 Nogaro blue S4 Stage 2. VAG for life.
corradovolksb
Full Member
***

Karma: +18/-1
Offline Offline

Posts: 112
If you want to tune it yourself use an mbox .bin with a matching xdf.  There is more info out for that file than others.
Logged
2000 Nogaro blue S4 Stage 2. VAG for life.
AustinLee
Jr. Member
**

Karma: +1/-0
Offline Offline

Posts: 37
Quote from: corradovolksb on August 24, 2016, 07:50:25 AM
If you want to tune it yourself use an mbox .bin with a matching xdf.  There is more info out for that file than others.

Got it! Ok so pretty much my ECU file that I currently have is useless to me unless i either get a definition file from giac(Impossible) or use it as a backup? You recommend that I uses someone elses stock tune and write it to my car? Like you said with a matching def file? The stock tune file from somebody else i flash to my ecu will have everything in the correct locations and wont confuse anything? Im assuming ill have to checksum it?
Logged
corradovolksb
Full Member
***

Karma: +18/-1
Offline Offline

Posts: 112
Yes your giac file can only be used as a backup.
What is your goal for your car? Are you wanting to just run a stock file or do you want to tune it yourself?
There are a bunch of stock 8d0907551m files on this site with really good xdf's to go with them just make sure the software levels are the same.  Always checksum the file before you flash it just incase its not correct and you end up bricking your ecu.
Logged
2000 Nogaro blue S4 Stage 2. VAG for life.
AustinLee
Jr. Member
**

Karma: +1/-0
Offline Offline

Posts: 37
Quote from: corradovolksb on August 24, 2016, 08:07:54 AM
Yes your giac file can only be used as a backup.
What is your goal for your car? Are you wanting to just run a stock file or do you want to tune it yourself?
There are a bunch of stock 8d0907551m files on this site with really good xdf's to go with them just make sure the software levels are the same.  Always checksum the file before you flash it just incase its not correct and you end up bricking your ecu.

Id like to learn to tune it myself, and in the meantime ill be buying an extra motor to build. The next motor will be 2.8 heads 3.0 crank, bigger pistons ect. Ill probably shoot for 500 bhp. I havent learned too much about checksum yet but ill experiment with it tonight. I have used INCA for some reprograming, im sure its somewhat similar. Thanks for all the help!
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 26, 2024, 05:44:27 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.035 seconds with 17 queries. (Pretty URLs adds 0s, 0q)