hello at all

I have a big problem with Audi A4 1.8T 2007 163hp
8E0909518AQ_0261208524_1037372505

I read this with Galletto v54 with OBD...
1.8 Turbo 150/180CV ME7.5.1 29f400BB..galletto say change driver
1.8/2.0 Turbo 150/180CV ME7.5.5 29f800BB....read success...100% Ignition off...

after a small talk with customer when will write the remap....he wants to drive off...car not start
VCDS go ECU an read fault code say "programming process not finished"
I have just read, not write...
what can I do?
the flash file is not corrupt---look Attachment. / maybe the eeprom damaged?
easy the original flash write OBD???

I need a solution

thanks for help

i found http://nefariousmotorsports.com/forum/index.php?topic=6719.0

is this right?

update...the car is running

 -> I remove fuses from Dash and Radio\Navi
 -> use a good bosch powersupply (14V)
 -> delet all fault code VCDS
 -> write the same file was read before with galletto
 -> note all prompts from galletto about ingnition on/off
 -> car start....running
 -> delet all fault code VCDS

Hey there,

I have the same car as you.

Using the patch that you've already found worked for me.
Have you checksummed your files using me7sum?

na but now im just getting 17978 engine start blocked by immobilizer