Pages: 1 2 [3]
Author Topic: Need someone to tune for backpressure  (Read 25588 times)
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #30 on: March 26, 2016, 08:25:07 AM »

Bank 1 sensor 2

im just curious here, why does it seem impossible to just scan the car and copy/paste the log?
Logged
Sugar_Mist
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 24


« Reply #31 on: March 26, 2016, 08:33:20 AM »

p0136 There ya go. I don't know where the fuel trim code went but oh well.
Logged
Sugar_Mist
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 24


« Reply #32 on: March 26, 2016, 08:34:31 AM »

Also would this be okay to flash/read ecu through obd port? http://www.amazon.com/Schumacher-SSC-1000A-SpeedCharge-Battery-Maintainer/dp/B0009IBJE4/ref=cm_cr_arp_d_product_top?ie=UTF8
Logged
Sugar_Mist
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 24


« Reply #33 on: March 27, 2016, 08:46:02 PM »

Okay guys  have another symptom. Starting my car has been getting worse and worse these past few days. At first it took a little more cranking to get it starting and the revs would shoot up to 2k. And tonight starting I took three times times after it stalled out right when it started. I unplugged my MAF yesterday assuming it was the culprit but it wasn't. Could it be fueling related?
Logged
adam-
Hero Member
*****

Karma: +123/-33
Offline Offline

Posts: 2179


« Reply #34 on: March 27, 2016, 11:48:43 PM »

What have you changed?
Logged
Sugar_Mist
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 24


« Reply #35 on: March 28, 2016, 08:14:46 AM »

I just installed a muffler it then something els started to fail I don't know whatit is
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #36 on: March 28, 2016, 12:11:51 PM »

fuel pump, fuel filter, ignition, coils, plugged injectors.

You need a qualified mechanic, not a internet forum.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
adam-
Hero Member
*****

Karma: +123/-33
Offline Offline

Posts: 2179


« Reply #37 on: March 28, 2016, 02:01:34 PM »

You need a qualified mechanic, not a internet forum.

This applies a lot; and a lot of people seem to forget this.  The internet cannot diagnose noises, boost leaks or hardware issues. Sad
Logged
Sugar_Mist
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 24


« Reply #38 on: April 12, 2016, 08:44:53 PM »

Replaced the fuel pump and fuel filter for $50 total and she's running like a dream now Smiley
Logged
Carsinc
Sr. Member
****

Karma: +17/-2
Offline Offline

Posts: 447


« Reply #39 on: April 21, 2016, 07:13:07 AM »

Nyet fixed it. Good job, But i for one still wonder about the 02 code that is coded i thing the o2 is unplugged and the cat is all that is coded out.
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #40 on: April 21, 2016, 07:33:58 AM »

Nyet fixed it. Good job, But i for one still wonder about the 02 code that is coded i thing the o2 is unplugged and the cat is all that is coded out.


Likely not coded out correctly...
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Pages: 1 2 [3]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.02 seconds with 17 queries. (Pretty URLs adds 0s, 0q)