Hi there! Ok, so I'm attempting to tune my original A4 1.8t .bin and I've learned what basic maps are supposed to look like such as MAF, Driver Wish and so forth. My issue is, I can't find any potential maps in my file that look like what I'm expecting to see. I've compared it to another 1.8t A4 bin file to make sure my hardware was valid and everything seems to line up almost identical. So I guess my question here is, on the 1.8t A4 bin file, what matrix and visual should I be searching for? Ideally I thought for the MAF I'd be looking for a 13x16 matrix and a steady visual of reverse shark fins with a flatline at each end in 16 bit format using lohi viewing. I have two xdf files but I'm not using TunerPro as I think WinOLS is a friendlier system. However if you all think I won't be able to find maps without a ols file then I suppose should pick up TunerPro as well.

Using WinOLS in 16 bit lohi.

Edit: I should add, I plan on running S4 4.2l Injectors and MAF

Edit: ECU ID - 8E0909518F

Any help here would be beyond appreciated. I'm not looking for any handouts and will gladly give whatever is needed for some assistance or read whatever I must. 

Thanks to all of you genuises!

I'll gladly move the post to the correct forum when I get home and upload my file. Thing is, I have two xdfs for my file but I'm not using tunerpro. So they show up just like .bin files in WinOLS.

Sorry again for the mispost, will move as soon as I have access to my desktop.

Edit: ECU ID - 8E0909518F

Here are the files...