Audi Coupe 2.7 swap

Pages: [1]

« previous next »

Author

Topic: Audi Coupe 2.7 swap (Read 4604 times)

nkiller

Newbie

Karma: +0/-0
Offline

Offline

Posts: 16

	Audi Coupe 2.7 swap « on: April 07, 2016, 01:38:52 PM »

Hi i drive CQ NM (italian 7A), and i've just bought crashed A6 AJK for swap.
So the main question is, can Me 7.1 run without dashboard?
My idea is CAN ABS/ESP/ASR disable, Immo off, and using B4 dashboard.
Is it possible or ...

Cheers !


	Logged

vwaudiguy

Hero Member

Karma: +53/-37
Offline

Offline

Posts: 2024

	Re: Audi Coupe 2.7 swap « Reply #1 on: April 07, 2016, 04:43:08 PM »

Quote from: nkiller on April 07, 2016, 01:38:52 PM

Yes.


	Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."

nkiller

Newbie

Karma: +0/-0
Offline

Offline

Posts: 16

	Re: Audi Coupe 2.7 swap « Reply #2 on: April 10, 2016, 04:43:36 PM »

Thanks, thanks.
And one another question. What you think about Sachs Performance clutch kit - (Singlemass flywheel, ceramic disc, and pressure plate) ?
Sachs p/n: 883089 000067


	Logged

vwaudiguy

Hero Member

Karma: +53/-37
Offline

Offline

Posts: 2024

	Re: Audi Coupe 2.7 swap « Reply #3 on: April 10, 2016, 05:38:09 PM »

Quote from: nkiller on April 10, 2016, 04:43:36 PM

Thanks, thanks.
And one another question. What you think about Sachs Performance clutch kit - (Singlemass flywheel, ceramic disc, and pressure plate) ?
Sachs p/n: 883089 000067

Not sure, haven't used it. Most people will go with an RS4 pressure plate/flywheel setup as a mild upgrade. It retains the dual mass fllywheel. Depends on the cars intended usage, and power goals.


	Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."

armageddon

Sr. Member

Karma: +20/-3
Offline

Offline

Posts: 348

	Re: Audi Coupe 2.7 swap « Reply #4 on: April 11, 2016, 01:27:42 PM »

most use organic version 883089 000066, being 883089 000067 more on/off type

it depends the torque you will be making


	Logged

nkiller

Newbie

Karma: +0/-0
Offline

Offline

Posts: 16

	Re: Audi Coupe 2.7 swap « Reply #5 on: April 11, 2016, 02:35:24 PM »

My power gains are something about 0.9 - 1 bar with stock K03.
Buget project - About 300hp...

The main problem is, that the donor car is automatic (no flywheel just triger), so buying second hand dualmass is a "cat in a bag", and i'm searching about the best and cheap solution.
About Sachs kit today my supplier give me an offer about 2300 euro Huh

, which is quite expensive...

Searching for solution ! Grin

Cheers !


	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12268

	Re: Audi Coupe 2.7 swap « Reply #6 on: April 11, 2016, 04:04:25 PM »

stock 2.7t clutch will hold that no problem.


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

armageddon

Sr. Member

Karma: +20/-3
Offline

Offline

Posts: 348

	Re: Audi Coupe 2.7 swap « Reply #7 on: April 11, 2016, 04:06:45 PM »

and you could buy a TTV smfw where you can either choose for stock/rs4 b5 clutch or rs4 B7 clutch


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 23, 2024, 02:24:09 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?