|
phila_dot
|
 |
« on: September 24, 2011, 05:34:55 PM »
|
|
|
I figured it wouldn't be a bad idea to have a consolidated place to request RAM variable locations and which variables to log.
What variable are you guys logging for target AFR?
lambas looked to be the best candidate. Can anyone provide the information to add lambas?
For bank specific, use lamsbg_w and lamsbg2_w?
|
|
|
|
« Last Edit: September 25, 2011, 09:10:24 AM by phila_dot »
|
Logged
|
|
|
|
|
phila_dot
|
|
« Reply #1 on: September 26, 2011, 05:39:15 PM »
|
|
|
I went through the FR and I definitely think lambas is ideal for logging target AFR. I also decided that lamsbg_w and lamsbg2_w should fill this need as well, so that is what I will use for now.
No one is logging target AFR?
Can anyone comment on lamsons_w and lamsons2_w? Is this only used for SAI?
I am also curious about dfrst_w and dfrst2_w.
|
|
|
|
|
Logged
|
|
|
|
|
nyet
|
|
« Reply #2 on: September 26, 2011, 10:22:15 PM »
|
|
|
ECUx has lamsbg_w (which is also in ME7logger) as AirFuelRatioDesired. I ALWAYS log it.
ME7Logger additionally can log lambts_w and lamfa_w. lamsbg_w = MIN(lambts_w, lamfa_w)
|
|
|
|
« Last Edit: September 26, 2011, 10:24:02 PM by nyet »
|
Logged
|
ME7.1 tuning guideECUx PlotME7Sum checksumTrim heatmap toolPlease do not ask me for tunes. I'm here to help people make their own. Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
|
|
|
|
phila_dot
|
|
« Reply #3 on: September 27, 2011, 10:11:27 AM »
|
|
|
Thanks Nyet.
I had assumed ECUx was logging lambas. I was figured out lamsbg_w(2) but thought lambas might be better as it is an average of both banks.
|
|
|
|
|
Logged
|
|
|
|
|
nyet
|
|
« Reply #4 on: September 27, 2011, 11:37:37 AM »
|
|
|
Either my definitions file is wrong, or there is nothing in lamsbg2_w...
I dont think req. is stereo in ME7.1 2.7t?
|
|
|
|
|
Logged
|
ME7.1 tuning guideECUx PlotME7Sum checksumTrim heatmap toolPlease do not ask me for tunes. I'm here to help people make their own. Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
|
|
|
|
phila_dot
|
|
« Reply #5 on: September 27, 2011, 12:26:29 PM »
|
|
|
Either my definitions file is wrong, or there is nothing in lamsbg2_w...
I dont think req. is stereo in ME7.1 2.7t?
I thought I saw it in mine. I'll check when I get home. I am pretty sure lamsbg2_w is used. The switch is SY_STERVK, which is stereo exhaust upstream of cat. You have values in fr2_w and fra2_w right? |
|
|
|
|
Logged
|
|
|
|
|
nyet
|
|
« Reply #6 on: September 27, 2011, 01:22:30 PM »
|
|
|
You have values in fr2_w and fra2_w right?
Definitely. Metered side is stereo, and so is injection time |
|
|
|
|
Logged
|
ME7.1 tuning guideECUx PlotME7Sum checksumTrim heatmap toolPlease do not ask me for tunes. I'm here to help people make their own. Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
|
|
|
|
phila_dot
|
|
« Reply #7 on: September 27, 2011, 03:42:01 PM »
|
|
|
You have values in fr2_w and fra2_w right?
Definitely. Metered side is stereo, and so is injection time Per the FR, ti_b2 is calculated using lamsbg2_w ---> rk2_w. The switch for ti_b2 also uses system constant SY_STERVK. |
|
|
|
|
Logged
|
|
|
|
|
nyet
|
|
« Reply #8 on: September 27, 2011, 03:51:21 PM »
|
|
|
hum something screwy with my config then. I'll have to check it again.
|
|
|
|
|
Logged
|
ME7.1 tuning guideECUx PlotME7Sum checksumTrim heatmap toolPlease do not ask me for tunes. I'm here to help people make their own. Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
|
|
|
|
phila_dot
|
|
« Reply #9 on: September 27, 2011, 05:53:16 PM »
|
|
|
See below for details of lamsbg2_w.
ECU file
lamsbg2_w , {AirFuelRatioRequiredBank2} , 0x3823C2, 2, 0x0000, {-} , 0, 0, 0.000244141, 0, {Lambdasoll Begrenzung (word) Bank 2}
Config file
;lamsbg2_w ;{AirFuelRatioRequiredBank2} ; {Lambdasoll Begrenzung (word) Bank 2}
This information was directly output from ME7Info.
|
|
|
|
|
Logged
|
|
|
|
|
TTQS
Guest
|
|
« Reply #10 on: January 29, 2012, 08:29:20 AM »
|
|
|
Please would somebody tell me the RAM address for lamfawkr_w?
I want to see if lamfaw-lamkr is being used to enrich below lean best torque at WOT instead of lambts on my tune.
Thanks in advance
TTQS
|
|
|
|
|
Logged
|
|
|
|
ArgDub
Full Member
Karma: +60/-1
 Offline
Posts: 202
|
|
« Reply #11 on: January 29, 2012, 11:38:48 AM »
|
|
|
Please check them, not 100% sure these are correct for lamfawkr_w
06A906032DL_0261206890_v354821_MT_OEM.bin: lamfawkr_w: 0x384AC0
06A906032DL_0261206890_v360227_MT_OEM.bin: lamfawkr_w: 0x384ABC
06A906032DR_ori.bin: lamfawkr_w: 0x384ABC
06A906032FC.BIN: lamfawkr_w: 0x384ABC
06A906032FC_0261207204_1037354889_ori.BIN: lamfawkr_w: 0x384AC0
06A906032KP.Bin: lamfawkr_w: 0x384AC8
06A906032LP_0261207955_v367518_ME7.5-1M_Jetta-1.8T-MT_OEM.bin: lamfawkr_w: 0x384AE0
06A906032NK_0261208163_367967.bin: lamfawkr_w: 0x384AE8
06A906032SJ.bin: lamfawkr_w: 0x384ACE
1ML906032A 00-76-ZC LEON CUPRA.bin: lamfawkr_w: 0x384ABC
4B0906018CH_0261207216_v360101_ME7.5_1M_Audi_A4_MT_OEM.bin: lamfawkr_w: 0x384AC2
4B0906018DH.bin: lamfawkr_w: 0x384B9A
4Z7907551R.bin: lamfawkr_w: 0x384BD6
8D0907551F.bin: lamfawkr_w: 0x384AF2
8D0907551K.bin: lamfawkr_w: 0x384AFA
8E0909518AF_0261207939_7366883_0003_1_8L_R4_5VT__audi_170_5s.bin: lamfawkr_w: 0x384BBC
8E0909518AS 0003A.Bin: lamfawkr_w: 0x384BE0
8E0909518F 0003.Bin: lamfawkr_w: 0x384B28
8E0909518F_orifromecu.bin: lamfawkr_w: 0x384B28
8N0906018AM_0261207417_1037360844.bin: lamfawkr_w: 0x384AC8
8N0906018AP 0002 0261207420_366423 TT 150.bin: lamfawkr_w: 0x384AC0
8N0906018BD_0261207776_v366364_ME7.5-1M_2003AudiTT_OEM.bin: lamfawkr_w: 0x384B26
Audi A3 1.8T 180HP 06A906032HP 0261207441 360647.bin: lamfawkr_w: 0x384AC8
Audi A3 1.8T AUQ 180HP 06A906032BJ 0261206892 360288.bin: lamfawkr_w: 0x384ABC
Audi TT 1.8T 180HP 8N0906018AQ 0261207416 363478.bin: lamfawkr_w: 0x384A9E
AUDI TT 1.8T 240HP 8N0906018CA 0261208086 375111.bin: lamfawkr_w: 0x384ACA
Audi TT 1.8T 8N0906018BR 0261208005 369398.bin: lamfawkr_w: 0x384ACE
Audi TT 1.8T AUQ 180HP 8L0906018Q 0261206790 360287.bin: lamfawkr_w: 0x384ABC
Audi_TT_B1800_R4V5T_110kW_0261207420_8N0906018AP_0001_1037360847.bin: lamfawkr_w: 0x384AC8
Seat ibiza 1.8T 180HP 06A906032RP 0261208521 371739.bin: lamfawkr_w: 0x384AEA
Seat leon 1.8T 180HP 06A906032DE 0261206866 0261206866 360165.bin: lamfawkr_w: 0x384AC0
Seat leon 1.8T 180HP 06A906032DE 0261206866 360165.bin: lamfawkr_w: 0x384AC0
Seat leon 1.8T AUQ 180HP 06A906032SJ 0261208531 369040.bin: lamfawkr_w: 0x384ACE
Seat leon 1.8T BAM 225HP 1ML906032A 0261208221 367220.bin: lamfawkr_w: 0x384ABC
Seat_Leon_1.8T_06A906032HN_0261207440_363908.bin: lamfawkr_w: 0x384AC0
Skoda octavia RS 1.8T 06A906032SG 0261208532 369039.bin: lamfawkr_w: 0x384ACE
Skoda_Octavia_1.8T_06A906032HJ_0261207436_1037366426.bin: lamfawkr_w: 0x384AC0
Skoda_Octavia_1.8T_06A906032HJ_0261207436_362287.bin: lamfawkr_w: 0x384AC8
VW beetle 1.8T 150HP 06A906032GQ 0261207349 360345.bin: lamfawkr_w: 0x384AC0
VW Bora 1.8T 06A906032HF 0261207447 363355 ME 7.5.5.bin: lamfawkr_w: 0x384AC8
VW Golf 1.8T 06A906032NK 0261208163 367967.bin: lamfawkr_w: 0x384AE8
VW golf 1.8T 06A906032LQ 0261207956 367519.bin: lamfawkr_w: 0x384AE0
VW Golf,Jetta NA MY2003 1.8T 06A906032PL S0003.bin: lamfawkr_w: 0x384AE0
VW Golf4 1.8T 06A906032DL 0261206890 354821 Original.bin: lamfawkr_w: 0x384AC0
VW_Jetta_1.8T_06A906032HS_0261207446_362563.bin: lamfawkr_w: 0x384AC8
VW_Jetta_1.8T_06A906032HS_0261207446_363354.bin: lamfawkr_w: 0x384AC8
Tell me if your ecu is not in the list
|
|
|
|
|
Logged
|
|
|
|
|
TTQS
Guest
|
|
« Reply #12 on: January 29, 2012, 01:20:06 PM »
|
|
|
Fabulous!
Thanks ArgDub. My ECU is in the list so I'll give it a try soon.
TTQS
|
|
|
|
|
Logged
|
|
|
|
Leon Mk1
Newbie
Karma: +0/-0
Offline
Posts: 24
|
|
« Reply #13 on: January 29, 2012, 05:07:29 PM »
|
|
|
anyone knows where i can find the o2 controller in ME7LOGGER ? i tried all the lines in .TXT that have LAMBDA\O2 but didn't find it 032HN ecu block 01 bank 3  tnx |
|
|
|
|
Logged
|
|
|
|
|
masterj
|
|
« Reply #14 on: February 03, 2012, 10:36:20 AM »
|
|
|
Could anyone help me find these variables? mimax_w, mifal_w, milsol_w? me7logger can't find them... binary attached  Thanks |
|
|
|
|
Logged
|
|
|
|
|
