LTFT not moving from 0% after clearing codes

Pages: [1]

« previous next »

Author

Topic: LTFT not moving from 0% after clearing codes (Read 3954 times)

theaznal

Newbie

Karma: +0/-0
Offline

Offline

Posts: 12

	LTFT not moving from 0% after clearing codes « on: April 29, 2016, 09:34:40 AM »

Hi -
I cleared my codes a few days ago and have driven normally, which includes plenty of WOT.

The STFT is behaving normally for my Mono Lambda tune, but LTFT still says 0%.

There are no active codes. Any idea on what caused this or what I can look after to resolve it? Huh


	Logged

vwaudiguy

Hero Member

Karma: +53/-37
Offline

Offline

Posts: 2024

	Re: LTFT not moving from 0% after clearing codes « Reply #1 on: April 29, 2016, 11:18:24 AM »

Can we get more detail on your setup? Ecu number, for example? I'm going to guess R32 turbo.


	Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."

theaznal

Newbie

Karma: +0/-0
Offline

Offline

Posts: 12

	Re: LTFT not moving from 0% after clearing codes « Reply #2 on: April 29, 2016, 01:09:14 PM »

Its a Daz file on a 8D0907551 Mbox.
120lb injectors, pt6466 turbo, built block, worked 2.8 heads.
Blow thru 82.55mm HPX maf. Have had no issue with fuel trims not working until now.

Thanks for any ideas.

Quote from: vwaudiguy on April 29, 2016, 11:18:24 AM

Can we get more detail on your setup? Ecu number, for example? I'm going to guess R32 turbo.


	Logged

vwaudiguy

Hero Member

Karma: +53/-37
Offline

Offline

Posts: 2024

	Re: LTFT not moving from 0% after clearing codes « Reply #3 on: April 29, 2016, 01:12:31 PM »

Had a car do this if the throttle body wasnt realigned after a code clear as strange as that sounds. Might want to give that a try.


	Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."

nubcake

Sr. Member

Karma: +53/-4
Offline

Offline

Posts: 401

	Re: LTFT not moving from 0% after clearing codes « Reply #4 on: May 01, 2016, 04:24:37 PM »

I'm not at all sure on this, but check for non-stock CLA*** (error class) changes. My assumption is that if you hide something relevant to fuel trims with those - it still won't adapt, even though no DTC is shown. Hope that makes sense. Never tested it myself and never looked closely into code, though - so take this with a grain of salt.


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

September 23, 2024, 03:29:31 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search