Pages: [1]
Author Topic: ME7.1.1 MK4 Golf R32 ECU - read SKC from ECU not the cluster?  (Read 3715 times)
Owdi
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 19



Hi all, I know this section is usually relating to reading / modifying / writing ECU files, but can anyone tell me what tools can be used just to read the SKC from an ECU? I know the usual method to read the SKC is from the instrument cluster, but what if the cluster is totally dead so the SKC is needed for the ECU to code a replacement cluster in?

Can anyone confirm how to read an R32 ME7.1.1 SKC code please?
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #1 on: May 01, 2016, 02:16:24 PM »

read. there is a cluster/immo section on here.
Logged
Owdi
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 19


« Reply #2 on: May 01, 2016, 02:31:03 PM »

read. there is a cluster/immo section on here.

The car n question has a totally dead / fried cluster, so it's not a matter of reading the SKC from the cluster, its a matter of reading it from the ECU, so I didn't go into the cluster section as I thought it was an ECU related question.
Logged
turboat
Hero Member
*****

Karma: +45/-3
Offline Offline

Posts: 619


« Reply #3 on: May 02, 2016, 03:40:24 AM »

Immo section covers a lot on ECUs too. Reading 7.1.1 is a pita from what I remember, bin is twice the size of a regular 7.5 and 7.1.1 immo. K0mpressed has definitely schooled me about this at some point before Smiley
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.02 seconds with 16 queries. (Pretty URLs adds 0s, 0q)