Pages: [1]
Author Topic: Bench PSU  (Read 3276 times)
bennyboi
Jr. Member
**

Karma: +2/-0
Offline Offline

Posts: 33


« on: May 07, 2016, 01:46:26 PM »

Hi all.

I'm just looking in to a basic bench setup for immo off and possibly mapping eventually.
Could you advise of if this PSU will do the job it's 12v 10A 120w



Many thanks
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #1 on: May 07, 2016, 07:04:28 PM »

Complete overkill. You need 1 amp at most.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
hopsis
Full Member
***

Karma: +13/-4
Offline Offline

Posts: 174


« Reply #2 on: May 07, 2016, 11:54:20 PM »

I just use a regular desktop pc psu. Also overkill but those things are dirt cheap. (Plus I already had a desktop pc at my garage table running Elsa/Etka/VCDS/Nefmoto/whatever).
Logged
bennyboi
Jr. Member
**

Karma: +2/-0
Offline Offline

Posts: 33


« Reply #3 on: May 08, 2016, 02:09:31 AM »

I figured they maybe over kill but £10 is it worth buying a atx psu
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 16 queries. (Pretty URLs adds 0s, 0q)