Pages: [1]
Author Topic: Tbi angle at start  (Read 4409 times)
overspeed
Sr. Member
****

Karma: +21/-5
Offline Offline

Posts: 388



« on: May 19, 2016, 04:52:31 AM »

Hi!  How to modify tbi angle at start? Dealing with E100 and help a lot to make it open wide bellow 17°C iat
Logged
overspeed
Sr. Member
****

Karma: +21/-5
Offline Offline

Posts: 388



« Reply #1 on: May 20, 2016, 08:24:05 AM »

Can´t believe I didn´t get any answer here...

C´mon... any hint how to make throttle more open in start will be welcome.
Logged
TijnCU
Hero Member
*****

Karma: +60/-4
Offline Offline

Posts: 690


flying brick


« Reply #2 on: May 21, 2016, 03:43:57 AM »

I saw your question and I didnt know  Grin
I do know that throttle body% is linear with ped% when the engine is not running. Not sure about during cranking. Maybe experiment with pedal maps?
Logged

overspeed
Sr. Member
****

Karma: +21/-5
Offline Offline

Posts: 388



« Reply #3 on: May 21, 2016, 07:04:34 AM »

Funny, in FR of me7.3.1 there is constant or map (cant remember) just for start value.

With ethanol you want to make it wide open on start bellow 17C to help vaporize...
Logged
overspeed
Sr. Member
****

Karma: +21/-5
Offline Offline

Posts: 388



« Reply #4 on: May 21, 2016, 10:55:03 AM »

Its on wdksom... In me7.3.1 there is kfwdksst kfwdktho and a lot of ways to make it.

In me7.5 only wdksnln but if i understand well it plays when you turn off engine too
Logged
overspeed
Sr. Member
****

Karma: +21/-5
Offline Offline

Posts: 388



« Reply #5 on: May 22, 2016, 07:37:57 AM »

Well, raise wdks from 0,2 to 20 in 50rpm to ser if it help, but temperature raise next 20C today lol...

Didnt notice any harm yet

Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 17 queries. (Pretty URLs adds 0s, 0q)