NefMoto > Technical > Flashing and Chipping > new to me9 -> flashing 2.0t b7 fwd manual A4
Pages: 1 2 [3]
« previous next »
Author Topic: new to me9 -> flashing 2.0t b7 fwd manual A4  (Read 25518 times)
gman86
Hero Member
*****

Karma: +45/-128
Offline Offline

Posts: 705
« Reply #30 on: June 21, 2016, 08:59:03 AM »
Quote from: k0mpresd on June 21, 2016, 08:37:26 AM
genuine mpps, x17, literally any genuine tool.

Nothing to do with it being a clone. A genuine MPPS v13 won't do it either. My Kess V2 does it fine.
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655
« Reply #31 on: June 21, 2016, 09:46:45 AM »
Quote from: gman86 on June 21, 2016, 08:59:03 AM
Nothing to do with it being a clone. A genuine MPPS v13 won't do it either. My Kess V2 does it fine.

who the hell is using a genuine v13 mpps? that is years and years old at this point.
but yes, you are correct, it is the protocol that is the problem, not the clone itself.
Logged
gman86
Hero Member
*****

Karma: +45/-128
Offline Offline

Posts: 705
« Reply #32 on: June 21, 2016, 10:01:33 AM »
Probably not a huge amount lol. I found v13 bricks ME9 ECUs in the Focus ST, but v16 works fine (and quick). I always take a BDM before trying though
Logged
BraxS4
Full Member
***

Karma: +2/-6
Offline Offline

Posts: 162
« Reply #33 on: June 24, 2016, 08:31:51 AM »
thanks, i have bdm on the way, yeah i read good stuff about v16, turns out my sw and cable is v13/12

will bdm both backup and fully write safely "a map'd bin"?
Logged
stage 3 b5 S4
BraxS4
Full Member
***

Karma: +2/-6
Offline Offline

Posts: 162
« Reply #34 on: June 24, 2016, 08:53:07 AM »
Quote from: gman86 on June 21, 2016, 10:01:33 AM
Probably not a huge amount lol. I found v13 bricks ME9 ECUs in the Focus ST, but v16 works fine (and quick). I always take a BDM before trying though

is your v16 a clone?  thanks
Logged
stage 3 b5 S4
gman86
Hero Member
*****

Karma: +45/-128
Offline Offline

Posts: 705
« Reply #35 on: June 24, 2016, 09:47:00 AM »
Yes
Logged
BraxS4
Full Member
***

Karma: +2/-6
Offline Offline

Posts: 162
« Reply #36 on: June 24, 2016, 10:40:47 AM »
i guess i get lucky sometime's, just backed up my ebay ecu also using v13, it does crash sometimes though, not worth risking without having a bdm backup
Logged
stage 3 b5 S4
Beaviz
Full Member
***

Karma: +8/-4
Offline Offline

Posts: 190
« Reply #37 on: June 25, 2016, 01:51:17 PM »
AFAIK it is writing not reading that will mess it up
Logged
BraxS4
Full Member
***

Karma: +2/-6
Offline Offline

Posts: 162
« Reply #38 on: June 25, 2016, 01:52:42 PM »
That's what I've been told. Got a full Bdm setup on the way. Wink
Logged
stage 3 b5 S4
gman86
Hero Member
*****

Karma: +45/-128
Offline Offline

Posts: 705
« Reply #39 on: June 25, 2016, 05:02:40 PM »
Of course writing will crash it. When you read, you read. When you write, you erase blocks then write. If any of those blocks fail, the whole ECU is useless. MED9 will let you recover via the port though.
Logged
Mechsoldier
Full Member
***

Karma: +5/-11
Offline Offline

Posts: 106
« Reply #40 on: August 20, 2016, 05:33:17 AM »
Quote from: gman86 on June 21, 2016, 08:59:03 AM
Nothing to do with it being a clone. A genuine MPPS v13 won't do it either. My Kess V2 does it fine.

x2 I've done it as well, are you also using the Genuine Kess v2? Or does the clone work?
Logged
gman86
Hero Member
*****

Karma: +45/-128
Offline Offline

Posts: 705
« Reply #41 on: August 20, 2016, 05:33:10 PM »
It's a clone and it works like a champ. I still use MPPS v13 to write to MED9 as its only an 8min30 write (Kess is 13), but it writes Ford/Volvo ME9 in like 60 seconds.
Logged
Pages: 1 2 [3]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 27, 2024, 01:48:10 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 18 queries. (Pretty URLs adds 0s, 0q)