Pages: [1]
Author Topic: ESKONF discrepancy  (Read 4020 times)
technic
Full Member
***

Karma: +18/-5
Offline Offline

Posts: 227


« on: May 30, 2016, 02:34:56 AM »

Hi,
I'm trying to disable SAI due to a different head is being used that doesn't have sai port.

I have two groups of possible ESKONF bytes in this binary.

0x11214 : AA FF 00 30 E3 F8 30

and

0x1121B : AA FF 00 30 23 F8 30

The difference between these would be that BKV (brake booster pump) is not installed in the latter.

I am a bit unsure whether these are valid ESKONF bytes at all, since there can only be one active configuration at a time...Perhaps it is chosen by coding ? Anyone?
/Lars



Logged
technic
Full Member
***

Karma: +18/-5
Offline Offline

Posts: 227


« Reply #1 on: May 30, 2016, 08:09:22 AM »

Ok, so, ESKONF_0_A and ESKONF_1_A is the two groups. Anyone know how they are selected?
Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #2 on: May 30, 2016, 08:33:15 AM »

I believe it's done through variant coding.
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #3 on: May 30, 2016, 08:38:03 AM »

I believe it's done through variant coding.

yes, auto vs manual normally ive always assumed. some files have 5 or 6 of them in a row. 559e is that way i think.

op: just change both.
Logged
technic
Full Member
***

Karma: +18/-5
Offline Offline

Posts: 227


« Reply #4 on: May 30, 2016, 01:47:52 PM »

Yep, already did that. Just curious how it worked instead of changing things in blind Smiley

Thanks for the input guys.

Skickat från min SM-G800F via Tapatalk 2
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)