Pages: [1]
Author Topic: Vag tacho  (Read 3605 times)
armisss4
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1


« on: June 16, 2016, 04:07:21 AM »

Hello. I've read on the other topics that it is possible to use VCDS cable for VAG tacho software, but i cant find any more info.
Currently i have VAG11.11 Hex+Can(FT232R) cable and VAG k+can commander 3.6(FT232R) cable. 
Is there any way to use one of them on VAG tacho software?
Thanks.
Logged
adam-
Hero Member
*****

Karma: +124/-33
Offline Offline

Posts: 2179


« Reply #1 on: June 16, 2016, 05:07:04 AM »

Bin Tacho, it sucks. 
Logged
H2Deetoo
Sr. Member
****

Karma: +26/-1
Offline Offline

Posts: 257


« Reply #2 on: June 16, 2016, 06:21:57 AM »

I am not sure about older versions of Vagtacho but the v5.0 version or higher uses a custom protocol so for sure those applications cannot be used with any other cable.
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #3 on: June 16, 2016, 07:47:09 AM »

the developer of vagtacho is very helpful. email him and ask your question.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 18 queries. (Pretty URLs adds 0.001s, 0q)