Pages: [1]
Author Topic: Repair ECU Circuit TT 1.8t (8L0906018Q)  (Read 6886 times)
AndrewS
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 11


« on: June 29, 2016, 01:25:47 AM »

Suddenly My TT 1.8T cranks but doesn't start and I got "ECM Power Relay Load Circuit: (J271)".

I check almost Fuse, Relays but they seem fine.

Finally I checked my ECU and found something badthings.

Some capacitors and resistors are broken. so I want to try replace them.

Anybody know volume of capacitors?

Please advise me which part might be broken !

Thanks.

Logged
fknbrkn
Hero Member
*****

Karma: +185/-23
Offline Offline

Posts: 1454


mk4 1.8T AUM


« Reply #1 on: June 29, 2016, 02:24:56 AM »

nothing to save here
Logged
yxx499
Full Member
***

Karma: +4/-10
Offline Offline

Posts: 106


« Reply #2 on: June 29, 2016, 04:24:00 AM »

From my point of view, you must buy another ECU unfortunately.

There are little chances to repair this ECU if more parts are broken.
Logged
eliotroyano
Hero Member
*****

Karma: +48/-8
Offline Offline

Posts: 825


« Reply #3 on: June 29, 2016, 05:26:05 AM »

Suddenly My TT 1.8T cranks but doesn't start and I got "ECM Power Relay Load Circuit: (J271)".
I check almost Fuse, Relays but they seem fine.
Finally I checked my ECU and found something badthings.
Some capacitors and resistors are broken. so I want to try replace them.
Anybody know volume of capacitors?
Please advise me which part might be broken !
Thanks.

AndrewS that ECU got bad and some weird damage in the back side of main circuit or motherboard. I see some diodes and capacitors damage. Also 95040 IC in the middle of back side of board, seems to me that is blown. Maybe damage is too extensive to repair it and maybe will be better to find other ECU.

Anyway in case you need to check whole ECU board I send you a nice pic with some useful info about it.
Logged
Hani
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 6


« Reply #4 on: August 01, 2016, 05:01:17 PM »

at first, clean that board with some isopropyl alcohol

i'll attach same pics...
Logged
seishuku
Full Member
***

Karma: +13/-0
Offline Offline

Posts: 131


« Reply #5 on: August 02, 2016, 02:42:39 PM »

I would be willing to bet that there are a ton of damaged traces, not worth trying to fix IMO.

Edit:
Are those vias just corroded, or are they blown out? Maybe both?

It's toast either way, I think.
« Last Edit: August 02, 2016, 02:44:48 PM by seishuku » Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 17 queries. (Pretty URLs adds 0s, 0q)